The characteristics of green intelligent engineering ethics emphasize the necessity of GI engineering ethics education. The ethics education of GI engineering is in the development stage, and it is urgent to fully understand the significance of evaluating the development of GI EEE. Only based on the GI manufacturing situation system to understand the implementation status of the core education of EEE can we objectively grasp the improvement space of GI EEE. In this study, the corresponding indicators were selected from three (...) dimensions of cultivation education, collaborative education, and situational education to form the element community of evaluation indicators. The fuzzy analytic hierarchy process and the fuzzy comprehensive evaluation method were used to empirically evaluate the implementation of the key mechanism of GI EEE. The results are as follows. The key education of GI EEE includes cultivation education of micro dimension, collaborative education of medium dimension, and situational education of macro dimension. The most important education is to strengthen the ethics education of GI engineering in the training process of college students. The coordination of GI EEE is becoming more and more important, and the integration and construction are the important pursuit of GI EEE. The cultivation education, collaborative education, and situational education of GI EEE are all at a general level. There is not only a gap between theory and practice in GI EEE but also insufficient attention to localization and coordination issues. The willingness of the government to participate in the ethical education of GI engineering is very insufficient. The optimized space of training education includes teaching cases and full-cycle ethical education. (shrink)

This paper discusses using the Chernobyl Incident as a case study in engineering ethics instruction. Groups of students are asked to take on the role of a faction involved in the Chernobyl disaster and to defend their decisions in a mock debate. The results of student surveys and the Engineering and Science Issues Test indicate that the approach is very popular with students and has a positive impact on moral reasoning. The approach incorporates technical, communication and teamwork skills and has (...) many of the features suggested by recent literature. (shrink)

Although undergraduate engineering ethics courses often include the development of moral sensitivity as a learning objective and the use of active learning techniques, teaching centers on the transmission of cognitive knowledge. This article describes a complementary assignment asking students to perform an ethics “experiment” on themselves that has a potential to enhance affective learning and moral imagination. The article argues that the focus on cognitive learning may not promote, and may even impair, our efforts to foster moral sensitivity. In contrast, (...) the active learning assignments and exercises, like the ethics “experiment” discussed, offer great potential to expand the scope of instruction in engineering ethics to include ethical behavior as well as knowledge. Engineering ethics education needs to extend beyond the narrow range of human action associated with the technical work of the engineer and explore ways to draw on broader lifeworld experiences to enrich professional practice and identity. (shrink)

This paper examines how young peoples’ lived experiences with personal technologies can be used to teach engineering ethics in a way which facilitates greater engagement with the subject. Engineering ethics can be challenging to teach: as a form of practical ethics, it is framed around future workplace experience in a professional setting which students are assumed to have no prior experience of. Yet the current generations of engineering students, who have been described as ‘digital natives’, do however have immersive personal (...) experience with digital technologies; and experiential learning theory describes how students learn ethics more successfully when they can draw on personal experience which give context and meaning to abstract theories. This paper reviews current teaching practices in engineering ethics; and examines young people’s engagement with technologies including cell phones, social networking sites, digital music and computer games to identify social and ethical elements of these practices which have relevance for the engineering ethics curricula. From this analysis three case studies are developed to illustrate how facets of the use of these technologies can be drawn on to teach topics including group work and communication; risk and safety; and engineering as social experimentation. Means for bridging personal experience and professional ethics when teaching these cases are discussed. The paper contributes to research and curriculum development in engineering ethics education, and to wider education research about methods of teaching ‘the net generation’. (shrink)

Continuing advances in human ability to manipulate matter at the atomic and molecular levels (i.e. nanoscale science and engineering) offer many previously unimagined possibilities for scientific discovery and technological development. Paralleling these advances in the various science and engineering subdisciplines is the increasing realization that a number of associated social, ethical, environmental, economic and legal dimensions also need to be explored. An important component of such exploration entails the identification and analysis of the ways in which current and prospective researchers (...) in these fields conceptualize these dimensions of their work. Within the context of a National Science Foundation funded Research Experiences for Undergraduates (REU) program in nanomaterials processing and characterization at the University of Central Florida (2002–2004), here I present for discussion (i) details of a “nanotechnology ethics” seminar series developed specifically for students participating in the program, and (ii) an analysis of students’ and participating research faculty’s perspectives concerning social and ethical issues associated with nanotechnology research. I conclude with a brief discussion of implications presented by these issues for general scientific literacy and public science education policy. (shrink)

Instituciones políticas como la Comisión Europea y el Gobierno de España han manifestadosu interés y predisposición para sentar las bases de una gobernanza ética de la Inteligencia Artificial (IA). En particular, han planteado el impulso de una Inteligencia Artificial confiable a través de unconjunto de directrices y estrategias. A pesar del beneficio que reportan estas iniciativas políticas, no es posible apreciar en su conjunto una estrategia educativa específica que contribuya a la generación de un ecosistema ético de IA fundamentado en (...) la confianza. En ese sentido, el objetivo principal de este trabajo consiste en explicar que la enseñanza de la ética aplicada en los estudios de ingeniería constituye una apuesta para el fortalecimiento profesional, la gobernanza ética yuna investigación e innovación responsables. Para alcanzar este objetivo, en primer lugar, serándetallados algunos de los aspectos esenciales que dotan de un valor significativo a la enseñanza de la ética aplicada, subrayando la responsabilidad social que presentan las universidades en este terreno. En segundo lugar, se mostrará una clasificación de las asignaturas de ética relacionadas con la ingeniería en el entorno de las universidades públicas españolas. Y, en tercer lugar, se ofrecerá un marco teórico enraizado en la ética discursiva, promoviendo una mirada cívica en el contexto educativo de las profesiones. (shrink)

Cultivating an understanding of ethical responsibilities and the societal impacts of technology is increasingly recognized as an important component in undergraduate engineering curricula. There is growing research on how ethics-related topics are taught and outcomes are attained, especially in the context of accreditation criteria. However, there is a lack of theoretical and empirical understanding of the role that educators play in ethics and societal impacts instruction and the factors that motivate and shape their inclusion of this subject in the courses (...) they teach and co-curricular activities they mentor. The goal of this research was to explore the role of faculty’s personal influences on their inclusion of ESI instruction in these settings. Personal influences are distinguished from external or environmental drivers such as teaching assignments, university policies, and department curriculum decisions. This research employed a grounded theory methodology and extracted data from interviews with 19 educators who teach ESI to engineering students to develop an emergent conceptualization of personal influences. Four categorie were identified: intrapersonal, interpersonal, academic, and professional. The findings suggested a wide range of entry points into ESI instruction for faculty members who do not currently teach ESI and for those looking to expand the inclusion of ESI in their courses. Based on these findings, departments and administrators are encouraged to foster educators’ agency, support access to professional development and engagement, facilitate interdisciplinary collaboration, and broaden hiring decisions to account for the impact of educators’ holistic identity on their instruction. (shrink)

The course Science, Technology, and Society is taken by about 500 engineering students each year at Bilkent University, Ankara. Aiming to complement the highly technical engineering programs, it deals with the ethical, social, cultural, political, economic, legal, environment and sustainability, health and safety, reliability dimensions of science, technology, and engineering in a multidisciplinary fashion. The teaching philosophy and experiences of the instructor are reviewed. Community research projects have been an important feature of the course. Analysis of teaching style based on (...) a multi-dimensional model is given. Results of outcome measurements performed for ABET assessment are provided. Challenges and solutions related to teaching a large class are discussed. (shrink)

Contemporary engineering education recognises the need for engineering ethics content in undergraduate programmes to extend beyond concepts that form the basis of professional codes to consider relationality and context of engineering practice. Yet there is debate on how this might be done, and we argue that the design and pedagogy for engineering ethics has to consider what and to whom ethics is taught in a particular context. Our interest is in the possibilities and challenges of pursuing the dual imperatives of (...) socialization and critique. Socialization involves creating opportunities for all, in a diverse cohort of students, to access and engage with the dominant professional engineering ethics knowledge, while critique involves engaging with a range of ways of knowing, valuing, being and using language as relevant in contemporary engineering practice. We identify conceptual tools from engineering ethics and ethical pedagogy in education scholarship for our context. We illustrate how we use these tools systematically to strengthen our reflective practice in a first-year university engineering ethics module to a deeper form of reflexivity. Specifically, we explore the ways in which we attend to the dual imperatives and also highlight opportunities that we miss. We identify as key opportunities design choices such as how we formulated questions and prompts, and how we attended to content, context and language in selecting classroom texts. Other key opportunities were pedagogical choices of when and how to use student contributions in discussion, and what was made explicit in the classroom and assessment. We share our plans to take our learnings forward in our practice and consider the generative possibilities of these learnings and the concepts in other contexts. (shrink)

Ethical conduct is the hallmark of excellence in engineering and scientific research, design, and practice. While undergraduate and graduate programs in these areas routinely emphasize ethical conduct, few receive formal ethics training as part of their curricula. The first purpose of this research study was to assess the relative effectiveness of ethics education in enhancing individuals’ general knowledge of the responsible conduct of research practices and their level of moral reasoning. Secondly, we examined the effects of ethics education on the (...) positive psychological outcomes of perspective-taking, moral efficacy, moral courage, and moral meaningfulness. To examine our research hypotheses, we utilized a pretest–posttest quasi-experimental design consisting of three ethics education groups (control, embedded modules, and stand-alone courses). Findings revealed that both embedded and stand alone courses were effective in enhancing participants’ perspective-taking, moral efficacy, and moral courage. Moral meaningfulness was marginally enhanced for the embedded module condition. Moral judgment and knowledge of responsible conduct of research practices were not influenced by either ethics education condition. Contrary to expectations, stand alone courses were not superior to embedded modules in influencing the positive psychological outcomes investigated. Implications of these findings for future research and practice are discussed. (shrink)

This paper aims to review the empirical and theoretical research on engineering ethics education, by focusing on the challenges reported in the literature. The analysis is conducted at four levels of the engineering education system. First, the individual level is dedicated to findings about teaching practices reported by instructors. Second, the institutional level brings together findings about the implementation and presence of ethics within engineering programmes. Third, the level of policy situates findings about engineering ethics education in the context of (...) accreditation. Finally, there is the level of the culture of engineering education. The multi-level analysis allows us to address some of the limitations of higher education research which tends to focus on individual actors such as instructors or remains focused on the levels of policy and practice without examining the deeper levels of paradigm and purpose guiding them. Our approach links some of the challenges of engineering ethics education with wider debates about its guiding paradigms. The main contribution of the paper is to situate the analysis of the theoretical and empirical findings reported in the literature on engineering ethics education in the context of broader discussions about the purpose of engineering education and the aims of reform programmes. We conclude by putting forward a series of recommendations for a socio-technical oriented reform of engineering education for ethics. (shrink)

To assess ethics pedagogy in science and engineering, we developed a new tool called the Engineering and Science Issues Test. ESIT measures moral judgment in a manner similar to the Defining Issues Test, second edition, but is built around technical dilemmas in science and engineering. We used a quasi-experimental approach with pre- and post-tests, and we compared the results to those of a control group with no overt ethics instruction. Our findings are that several stand-alone classes showed a significant improvement (...) compared to the control group when the metric includes multiple stages of moral development. We also found that the written test had a higher response rate and sensitivity to pedagogy than the electronic version. We do not find significant differences on pre- test scores with respect to age, education level, gender or political leanings, but we do on whether subjects were native English speakers. We did not find significant differences on pre- test scores based on whether subjects had previous ethics instruction; this could suggest a lack of a long-term effect from the instruction. (shrink)

This paper aims to call attention to the potential of using film in engineering ethics education, which has not been thoroughly discussed as a pedagogical method in this field. A review of current approaches to teaching engineering ethics reveals that there are both learning outcomes that need more attention as well as additional pedagogical methods that could be adopted. Scholarship on teaching with film indicates that film can produce ethical experiences that go beyond those produced by both conventional methods of (...) teaching engineering ethics and more arts-based methods such as fiction, as well as connect ethics learning outcomes and issues to the lifeworld of a person. The paper further illustrates the potential of using Miyazaki Hayao’s film The Wind Rises for highlighting a range of ethical issues pertaining to engineering. It also discusses the important role educators play in how film can be used effectively in the classroom. Synthesizing a range of sources from film theory to the use of film in business and medical education, the paper makes the case for using film in engineering ethics education and calls for more research on the use of this method. (shrink)

This paper investigates four questions related to ethical issues associated with the involvement of engineers and scientists in 'military work', including the influence of ethical values and beliefs, the role of gendered perspectives and moves beyond the purely technical. It fits strongly into a human (and planet)-centred systems perspective and extends my previous AI and Society papers on othering and narrative ethics, and ethics and social responsibility. It has two main contributions. The first involves an analysis of the literature through (...) the application of different ethical theories and the application of gendered analysis to discussion of masculinities in engineering and the military. The second is a survey of scientists and engineers to investigate their opinions and experiences. The conclusions draw together the results of these two contributions to provide preliminary responses to the four questions and include a series of recommendations covering education and training, ethical approval of work not involving human participants or animals, the need for organisational support, approaches covering wider perspectives and the encouragement of individual ethical commitment. (shrink)

How can a course on engineering ethics affect an undergraduate student’s feelings of responsibility about moral problems? In this study, three groups of students were interviewed: six students who had completed a specific course on engineering ethics, six who had registered for the course but had not yet started it, and six who had not taken or registered for the course. Students were asked what they would do as the central character, an engineer, in each of two short cases that (...) posed moral problems. For each case, the role of the engineer was successively changed and the student was asked how each change altered his or her decisions about the case. Students who had completed the ethics course considered more options before making a decision, and they responded consistently despite changes in the cases. For both cases, even when they were not directly involved, they were more likely to feel responsible and take corrective action. Students who were less successful in the ethics course gave answers similar to students who had not taken the course. This latter group of students seemed to have weaker feelings of responsibility: they would say that a problem was “not my business.” It appears that instruction in ethics can increase awareness of responsibility, knowledge about how to handle a difficult situation, and confidence in taking action. (shrink)

This paper details efforts by the Purdue School of Engineering and Technology at Indiana University Purdue University Indianapolis to create a single instrument for honors science, technology, engineering and mathematics students wishing to demonstrate competence in the IUPUI Principles of Undergraduate Learning and Accreditation Board for Engineering and Technology Engineering Accreditation Criterion and Technology Accreditation Criterion 2, a through k. Honors courses in Human Behavior, Ethical Decision-Making, Applied Leadership, International Issues and Leadership Theories and Processes were created along with a (...) specific menu of activities and an assessment rubric based on PUL’s and ABET criteria to evaluate student performance in the aforementioned courses. Students who complete the series of 18 Honors Credit hours are eligible for an Honors Certificate in Leadership Studies from the Department of Organizational Leadership and Supervision. Finally, an accounting of how various university assessment criteria, in this case the IUPUI Principles of Undergraduate Learning, can be linked to ABET outcomes and prove student competence in both, using the aforementioned courses, menu of items, and assessment rubrics; these will be analyzed and discussed. (shrink)

Ethics education has become essential in modern engineering. Ethics education in engineering has been increasingly implemented worldwide. It can improve ethical behaviors in technology and engineering design under the guidance of the philosophy of technology. Hence, this study aims to compare China-US engineering ethics education in Sino-Western philosophies of technology by using literature studies, online surveys, observational researches, textual analyses, and comparative methods. In my original theoretical framework and model of input and output for education, six primary variables emerge in (...) the pedagogy: disciplinary statuses, educational goals, instructional contents, didactic models, teaching methods, and edificatory effects. I focus on the similarities and differences of engineering ethics educations between China and the US in Chinese and Western philosophies of technology. In the field of engineering, the US tends toward applied ethics training, whereas China inclines toward practical moral education. The US is the leader, particularly in the amount of money invested and engineering results. China has quickened its pace, focusing specifically on engineering labor input and output. Engineering ethics is a multiplayer game effected at various levels among lower level technicians and engineers, engineering associations, and stockholders; middle ranking engineering ethics education, the ministry of education, the academy of engineering, and the philosophy of technology; and top national and international technological policies. I propose that professional engineering ethics education can play many important roles in reforming engineering social responsibility by international cooperation in societies that are becoming increasingly reliant on engineered devices and systems. Significantly, my proposals contribute to improving engineering ethics education and better-solving engineering ethics issues, thereby maximizing engineering sustainability. (shrink)

This article describes the education portion of an ongoing grant-sponsored education and research project designed to help graduate students in all engineering disciplines learn about the basic ethical principles, rules, and obligations associated with engineering practice in the United States. While the curriculum developed for this project is used for both domestic and international students, the educational materials were designed to be sensitive to the specific needs of international graduate students. In recent years, engineering programs in the United States have (...) sought to develop a larger role for professional ethics education in the curriculum. Accreditation requirements, as well as pressures from the private sector, have helped facilitate this shift in focus. Almost half of all engineering graduate students in the U.S. are international students. Further, research indicates that the majority of these students will remain in the U.S. to work post-graduation. It is therefore in the interest of the profession that these students, coming from diverse backgrounds, receive some formal exposure to the professional and ethical expectations and norms of the engineering profession in the United States to help ensure that they have the knowledge and skills—non-technical as well as technical—required in today’s engineering profession. In becoming acculturated to professional norms in a host country, international students face challenges that domestic students do not encounter; such as cultural competency, language proficiency, and acculturation stress. Mitigating these challenges must be a consideration in the development of any effective education materials. The present article discusses the project rationale and describes the development of on-line instructional materials aimed at helping international engineering graduate students acclimate to professional engineering ethics standards in the United States. Finally, a brief data summary of students’ perceptions of the usefulness of the content and instructional interface is provided to demonstrate the initial effectiveness of the materials and to present a case for project sustainability. (shrink)

To assess ethics pedagogy in science and engineering, we developed a new tool called the Engineering and Science Issues Test (ESIT). ESIT measures moral judgment in a manner similar to the Defining Issues Test, second edition, but is built around technical dilemmas in science and engineering. We used a quasi-experimental approach with pre- and post-tests, and we compared the results to those of a control group with no overt ethics instruction. Our findings are that several (but not all) stand-alone classes (...) showed a significant improvement compared to the control group when the metric includes multiple stages of moral development. We also found that the written test had a higher response rate and sensitivity to pedagogy than the electronic version. We do not find significant differences on pre-test scores with respect to age, education level, gender or political leanings, but we do on whether subjects were native English speakers. We did not find significant differences on pre-test scores based on whether subjects had previous ethics instruction; this could suggest a lack of a long-term effect from the instruction. (shrink)

The goal of this paper is to stress the significance of ethics for engineering education and to illustrate how it can be brought into the mainstream of higher education in a natural way that is integrated with the teaching objectives of enriching the core meaning of engineering. Everyone will agree that the practicing engineer should be virtuous, should be a good colleague, and should use professional understanding for the common good. But these injunctions to virtue do not reach closely enough (...) the ethic of the engineer as engineer, as someone acting in a uniquely engineering situation, and it is to such conditions that I wish to speak through a set of specific examples from recent history. I shall briefly refer to four controversies between engineers. Then, in some detail I shall narrate three historical cases that directly involve the actions of one engineer, and finally I would like to address some common contemporary issues. The first section, “Engineering Ethics and the History of Innovation” includes four cases involving professional controversy. Each controversy sets two people against each other in disputes over who invented the telegraph, the radio, the automobile, and the airplane. In each dispute, it is possible to identify ethical and unethical behavior or ambiguous ethical behavior that serves as a basis for educational discussion. The first two historical cases described in “Crises and the Engineer” involve the primary closure dam systems in the Netherlands, each one the result of the actions of one engineer. The third tells of an American engineer who took his political boss, a big city mayor, to court over the illegal use of a watershed. The challenges these engineers faced required, in the deepest sense, a commitment to ethical behavior that is unique to engineering and instructive to our students. Finally, the cases in “Professors and Comparative Critical Analysis” illuminate the behavior of engineers in the design of structures and also how professors can make public criticisms of designs that seem wasteful. (shrink)

Helping scientists and engineers challenge received assumptions about how science, engineering, and society relate is a critical cornerstone for macroethics education. Scientific and engineering research are frequently framed as first steps of a value-free linear model that inexorably leads to societal benefit. Social studies of science and assessments of scientific and engineering research speak to the need for a more critical approach to the noble intentions underlying these assumptions. “Science Outside the Lab” is a program designed to help early-career scientists (...) and engineers understand the complexities of science and engineering policy. Assessment of the program entailed a pre-, post-, and 1 year follow up survey to gauge student perspectives on relationships between science and society, as well as a pre–post concept map exercise to elicit student conceptualizations of science policy. Students leave Science Outside the Lab with greater humility about the role of scientific expertise in science and engineering policy; greater skepticism toward linear notions of scientific advances benefiting society; a deeper, more nuanced understanding of the actors involved in shaping science policy; and a continued appreciation of the contributions of science and engineering to society. The study presents an efficacious program that helps scientists and engineers make inroads into macroethical debates, reframe the ways in which they think about values of science and engineering in society, and more thoughtfully engage with critical mediators of science and society relationships: policy makers and policy processes. (shrink)

Even after multiple cycles of ABET accreditation, many engineering programs are unsure of how much curriculum content is needed to meet the requirements of ABET’s Criterion 3.f (an understanding of professional and ethical responsibility). This study represents the first scholarly attempt to assess the impact of curriculum reform following the introduction of ABET Criterion 3.f. This study sought to determine how much professional and ethical responsibility curriculum content was used between 1995 and 2005, as well as how, when, why, and (...) to what effect changes in the amount of content occurred. Subsequently, the study sought to evaluate if different amounts of curriculum content generated differing student outcomes. The amount of curriculum content used by each of the participating programs was identified during semi-structured interviews with program administrators and a review of ABET Self-Study documents. Quantitative methods were applied to determine if a relationship existed between the curriculum content and performance on a nationally administered, engineering-specific standardized examination. The findings indicate a statistical relationship, but a lack of structure between the amount of required content in the curriculum and performance on the examination. Additional findings were also generated regarding the way that programs interpret the Criterion 3.f feedback generated during accreditation visits. The primary impact of this study is that it dispels the myth that more courses or course time on professionalism and ethics will necessarily lead to positive engineering education outcomes. Much of the impetus to add more curriculum content results from a lack of conclusive feedback during ABET accreditation visits. (shrink)

The unique properties of nanotechnology have made nanotechnology education and its related subjects increasingly important not only for students but for mankind at large. This particular technology brings educators to work together to prepare and produce competent engineers and scientists for this field. One of the key challenges in nanotechnology engineering is to produce graduate students who are not only competent in technical knowledge but possess the necessary attitude and awareness toward the social and ethical issues related to nanotechnology. In (...) this paper, a research model has been developed to assess Malaysian nanotechnology engineering students’ attitudes and whether their perspectives have attained the necesary objectives of ethical education throughout their programme of study. The findings from this investigation show that socio ethical education has a strong influence on the students’ knowledge, skills and attitudes pertaining to socio ethical issues related to nanotechnology. (shrink)

This paper reports the findings of a comparative study in which students’ perceived attainment of the objectives of an engineering ethics education and their attitude towards engineering ethics were investigated and compared. The investigation was carried out in Japan and Malaysia, involving 163 and 108 engineering undergraduates respectively. The research method used was based on a survey in which respondents were sent a questionnaire to elicit relevant data. Both descriptive and inferential statistical analyses were performed on the data. The results (...) of the analyses showed that the attainment of the objectives of engineering ethics education and students’ attitude towards socio-ethical issues in engineering were significantly higher and positive among Japanese engineering students compared to Malaysian engineering students. Such findings suggest that a well-structured, integrated, and innovative pedagogy for teaching ethics will have an impact on the students’ attainment of ethics education objectives and their attitude towards engineering ethics. As such, the research findings serve as a cornerstone to which the current practice of teaching and learning of engineering ethics education can be examined more critically, such that further improvements can be made to the existing curriculum that can help produce engineers that have strong moral and ethical characters. (shrink)

Ethics teaching in engineering can be problematic because of student perceptions of its subjective, ambiguous and philosophical content. The use of discipline-specific case studies has helped to address such perceptions, as has practical decision making and problem solving approaches based on some ethical frameworks. However, a need exists for a wider range of creative methods in ethics education to help complement the variety of activities and learning experiences within the engineering curriculum. In this work, a novel approach is presented in (...) which first-year undergraduate students are responsible for proposing ethics education activities of relevance to their peers and discipline area. The students are prepared for the task through a short introduction on engineering ethics, whereby generic frameworks for moral and professional conduct are discussed, and discipline and student-relevance contexts provided. The approach has been used in four departments of engineering at Imperial College London, and has led to the generation of many creative ideas for wider student engagement in ethics awareness, reflection and understanding. The paper presents information on the premise of the introductory sessions for supporting the design task, and an evaluation of the student experience of the course and task work. Examples of proposals are given to demonstrate the value of such an approach to teachers, and ultimately to the learning experiences of the students themselves. (shrink)

Research misconduct has been thoroughly discussed in the literature, but mainly in terms of definitions and prescriptions for proper conduct. Even when case studies are cited, they are generally used as a repository of “lessons learned.” What has been lacking from this conversation is how the lessons of responsible conduct of research are imparted in the first place to graduate students, especially those in technical fields such as engineering. Nor has there been much conversation about who is responsible for what (...) in training students in Responsible Conduct of Research or in allocating blame in cases of misconduct. This paper explores three seemingly disparate cases of misconduct—the 2004 plagiarism scandal at Ohio University; the famous Robert Millikan article of 1913, in which his reported data selection did not match his notebooks; and the 1990 fabrication scandal in Dr. Leroy Hood’s research lab. Comparing these cases provides a way to look at the relationship between the graduate student (or trainee) and his/her advisor (a relationship that has been shown to be the most influential one for the student) as well as at possibly differential treatment for established researchers and researchers-in-training, in cases of misconduct. This paper reflects on the rights and responsibilities of research advisers and their students and offers suggestions for clarifying both those responsibilities and the particularly murky areas of research-conduct guidelines. (shrink)