Abstract
The outburst of the fourth Industrial Revolution had a significant impact on many aspects of life. The discovery of new technologies in medicine has resulted in innovations: organ transplants. The introduction of three-dimensional (3D) organ printing technology promises improvements to the field. Organs such as the liver, kidneys, heart and others are printed to meet the needs of the actual organs. However, the production of prototype organs to replace the original organs is associated with the issue of changing the creation of Allah. Accordingly, this study will analyse the issue of changing the creation of God in three-dimensional (3D) organ printing technology according to the perspective of Islamic law. Several appropriate methodologies in Islamic law (usul fiqh) are used such as legal reasoning through maqasid shariah perspective and analogical reasoning. The result shows that three-dimensional (3D) organ printing technology falls under the permissible category of changing the creation of Allah because it can save human lives. The production of organs through 3D printing involving changes included in the category of necessity (daruri) and need (hajiy) is permissible, but the category of desirable (tahsini) requires further specifications.
Similar content being viewed by others
References
Al-Asbahi, M. 2004. Al-Muwatta Imam Malik. UAE: Mu’assasah Zayed bin Sultan.
Al-Bukhari, M. I. 2001. Sahih al-Bukhari. Dar Tawq al-Najah.
al-Fawzan, S.M. 2008. al-Jarahah al-Tajmiliyyah. Riyadh: Dar al-Tadmuriyyah.
al-Fawzan, S.M. n.d. Taghyir Khalqillah Dhawabituhu wa Tatbiqatuhu, Seminar Dhawabit wa Qawaid fi al-Libas wa al-Zinah wa al-Tajmil, al-Amanah al-Ammah bi Mauqi’ al-Fiqh al-Islami.
Al-Naisaburi, M. 1954. Sahih Muslim. Beirut: Dar Ihya’ al-Kutub al-‘Arabi.
Al-Nasa’i, A. S. 2001. Al-Sunan al-Kubra. Beirut: Mu’assasah al-Risalah.
Al-Nawawi, Y.S. 1992. Riyadh al-Salihin. Beirut: Al-Maktab al-Islami.
Al-Nawawi, Y.S. 2006. Bustan al-‘Arifin. Beirut: Dar al-Basha’ir.
Al-Qurtubi. n.d. Al-Jami’ li Ahkam al-Quran. Beirut: Mu’assasah al-Risalah.
Al-Salus, A. A. 2008. Mausu'ah al-Qadaya al-Fiqhiyyah al-Mu'asirah (Encyclopedia of Contemporary Fiqh Issues). Beirut: Mu'assasah al-Rayyan.
al-Shatibi. n.d. Al- Muwafaqat fi Usul al-Shariah. Beirut: Dar al-Kutub al- Ilmiyyah.
Alsomali, N., and G. Hussein. 2021. CRISPR-Cas9 and He Jiankui’s Case: an Islamic Bioethics Review using Maqasid al-Shari’a and Qawaid Fighiyyah. Asian Bioethics Review 13: 149–165. https://doi.org/10.1007/s41649-021-00167-1.
Al-Tirmidhi, M.I. 1975. Sunan al-Tirmidhi. Cairo: Matba’ah al-Halabi.
Alwazna, R.Y. 2016. Islamic Law: Its Sources, Interpretation and the Translation of It into Laws Written in English. International Journal for the Semiotics of Law 29: 251–260. https://doi.org/10.1007/s11196-016-9473-x.
Cantarovich, F. 2018. The society, the barriers to organ donation and alternatives for a change. In Organ Donation and Transplantation-Current Status and Future Challenges, 47–68. IntechOpen.
Che Mohamad, C.A., and A.A. Hashi. 2018. Stem cells research: Therapeutic potentials and ethical issues from Islamic perspective. IIUM Medical Journal Malaysia 17 (1). https://doi.org/10.31436/imjm.v17i1.1033.
Cui, H., M. Nowicki, J.P. Fisher, and L.G. Zhang. 2017. 3D bioprinting for organ regeneration. Advanced Healthcare Materials 6 (1): 1601118.
Culot, G., G. Nassimbeni, G. Orzes, and M. Sartor. 2020. Behind the definition of Industry 4.0: Analysis and open questions. International Journal of Production Economics 226:107617. https://doi.org/10.1016/j.ijpe.2020.107617.
Fadel, H., W.D. Ahmed, M. Haque, and F.A. Khan. 2010. Stem cell research: The IMANA perspective. Lombard: Islamic Medical Association of North America.
Gilbert, F., C.D. O’Connell, T. Mladenovska, and S. Dodds. 2018. Print me an organ? Ethical and regulatory issues emerging from 3D bioprinting in medicine. Science and Engineering Ethics 24 (1):73–91. https://doi.org/10.1007/s11948-017-9874-6.
Goddard, E., and S. Dodds. 2020. Ethics and policy for bioprinting. In 3D bioprinting. methods in molecular biology, vol 2140, ed. J Crook, 43–64. New York: Humana. https://doi.org/10.1007/978-1-0716-0520-2_4.
Hamdan, Mohammad Naqib, and Mohd Anuar. Ramli. 2015. Konsep Mengubah Ciptaan God: Analisis Hukum Pengkulturan Daging. Journal of Fatwa Management and Research 5 (1): 81–105.
Hamdan, Mohammad Naqib, and Mohd Anuar. Ramli. 2019. Daging Kultur: Sejarah, Konsep dan Hukum Islam. Kuala Lumpur: IKIM.
Hamdan, Mohammad Naqib, and Mohd Anuar Ramli. 2022. Panduan Shariah terhadap Pengubahan Ciptaan Allah SWT. Nilai: Penerbit USIM.
Hamdan, Mohammad Naqib., Mohd Anuar Ramli, A.A.J. Zulbahri, A.M. Nudin, and M.A. Dahaman Dahlan. 2016. Konsep Taghyir Ciptaan Allah S.W.T. Dalam Rawatan Kosmetik: Analisis Hukum Rekonstruksi Vagina Menurut Perspektif Fatwa Semasa, Prosiding Seminar Fatwa Antarabangsa (IsFatwa). Nilai: USIM.
Hamdan, Mohammad Naqib, Mohd Anuar Ramli, Aminudin H., Nur Najwa Hanani A.R., Muhammad Faiz M.S., and Syamsul Azizul M. 2021. The application of Maqasid-Oriented approach in islamic bioethics: A case study on fatwa related to cosmetic, plastic and reconstructive surgery. IIUM Medical Journal Malaysia 20 (1):71–81. https://doi.org/10.31436/imjm.v20i1.1781.
Hamdan, Mohammad Naqib, Mohd Anuar. Ramli, M.F.M. Ariffin, H.A.A. Thaidi, M.F.A. Rahman, N. Ramli, and N.S.M. Riza. 2022. The concept of Taghyir Khalqillah through Mufassirin perspective: An analysis based on Surah al-Nisa’, Verse 119. International Journal of Academic Research in Business and Social Sciences 12 (1):1682–1699. https://doi.org/10.6007/IJARBSS/v12-i1/12029.
Hanbal, A. 2001. Musnad al-Imam Ahmad bin Hanbal. Beirut: Mu’assasah al-Risalah.
Ibn ‘Atiyyah. n.d. Al-Muharrar al-Wajiz fi Tafsir al-Kitab al- ‘Aziz. Beirut: Dar Kutub al-Ilmiyyah.
Ibn Hajr al- ‘Asqalani. 2001. Fath al-Bari. Kaherah: Maktabah al-Salafiyyah.
Ibn Kathir. n.d. Tafsir al-Quran al- ‘Azim. Riyadh: Dar Tayyibah.
JAKIM. 2015. Kompilasi Pandangan Hukum Muzakarah Jawatan Kuasa Fatwa Majlis Kebangsaan Bagi Hal Ehwal Ugama Islam Malaysia (Compilation of MKI’s Resolution). Kuala Lumpur: JAKIM.
Kirillova, A., S. Bushev, A. Abubakirov, and G. Sukikh. 2020. Bioethical and legal issues in 3D bioprinting. International Journal of Bioprinting 6 (3): 7–16. https://doi.org/10.18063/ijb.v6i3.272.
Klak, M., T. Bryniarski, P. Kowalska, M. Gomolka, G. Tymicki, K. Kosowska, et al. 2020. Novel strategies in artificial organ development: what is the future of medicine? Micromachines 11 (7): 646. https://doi.org/10.3390/mi11070646.
Mironov, V., V. Kasyanov, and R.R. Markwald. 2011. Organ printing: From bioprinter to organ biofabrication line. Current Opinion in Biotechnology 22 (5):667–673. https://doi.org/10.1016/j.copbio.2011.02.006.
Moscalu, Roxana, Anne Marie Smith, and Harbans L. Sharma. 2015. Diseases that can be cured only by organ donations. Archive of Clinical Cases 2 (4):182–197. https://doi.org/10.22551/2015.08.0204.10051.
MUIS. 2001. Stem cell research. Singapore: Islamic Religious Council of Singapore. https://www.muis.gov.sg/officeofthemufti/Fatwa/English-Stem-Cell-Research. Accessed 20 May 2022.
Nardo, M., D. Forino, and T. Murino. 2020. The evolution of man–machine interaction: The role of human in Industry 4.0 paradigm. Production & Manufacturing Research 8 (1): 20–34. https://doi.org/10.1080/21693277.2020.1737592.
Ogoh, G. 2020. The ethical issues of additive manufacturing. PhD Thesis. Leicester: De Montfort University.
Pavlovich, S. 2016. Should society encourage the development of 3D printing, particularly 3D bioprinting of tissues and organs? International Journal of Scientific & Technology Research 5: 41–46.
Radenkovic, Dina, Atefeh Solouk, and Alexander Seifalian. 2016. Personalized development of human organs using 3D printing technology. Medical Hypotheses 87: 30–33. https://doi.org/10.1016/j.mehy.2015.12.017.
Rezende, R. A., J. A. Nogueiraa, V. F. Laraa, V. Mironova, R. M. Filhob, and J. V. da Silvaa 2013. Development of a bioreactor by computer fluid dynamics simulations for the maturation of 3d printed organs by rapid prototyping. Chemical Engineering 32: 1153–1158.
Rosli, Mohd Rilizam Bin, Hussin Bin Salamon, Sulaiman Shakib Bin Mohd Noor, Nasrul Hisyam Bin Nor Muhamad, Mohammad Naqib Bin Hamdan, Aminuddin Bin Ruskam, Ezwan Rafiq Bin Hussin, and Nurhanani Hussin. 2020. The role of ijtihad in expanding zakat distribution. Journal of Critical Reviews 7 (11):746–749. https://doi.org/10.31838/jcr.07.11.133.
Sima, Violeta, Ileana G. Gheorghe, Jonel Subić, and Dumitru Nancu. 2020. Influences of the industry 4.0 revolution on the human capital development and consumer behavior: A systematic review. Sustainability 12 (10):4035. https://doi.org/10.3390/su12104035.
Vermeulen, Niki, Gill Haddow, Tirion Seymour, Alan Faulkner-Jones, and Wenmiao Shu. 2017. 3D bioprint me: A socioethical view of bioprinting human organs and tissues. Journal of Medical Ethics 43 (9):618–624. https://doi.org/10.1136/medethics-2015-103347.
Vijayavenkataraman, S., W.F. Lu, and J.Y.H. Fuh. 2016. 3D bioprinting–an ethical, legal and social aspects (ELSA) framework. Bioprinting 1:11–21. https://doi.org/10.1016/j.bprint.2016.08.001.
Vikram Singh, A., M. Hasan Dad Ansari, S. Wang, P. Laux, A. Luch, A. Kumar, et al. 2019. The adoption of three-dimensional additive manufacturing from biomedical material design to 3d organ printing. Applied Sciences 9 (4): 811. https://doi.org/10.3390/app9040811.
Zaidan, A.K. 1993. Al-Mufassal fi Ahkam al-Mar’ah wa al-Bayt al-Muslim fi al-Shari‘ah al-Islamiyyah. Beirut: Mu’assasah al-Risalah.
Zhang, Yu Shrike, Kan Yue, Julio Aleman, Kamyar Mollazadeh-Moghaddam, Syeda Mahwish Bakht, Jingzhou Yang, et al. 2017. 3D bioprinting for tissue and organ fabrication. Annals of Biomedical Engineering 45 (1):148–163. https://doi.org/10.1007/s10439-016-1612-8.
Funding
This work was supported by the Fundamental Research Grant Scheme under Ministry of Higher Education, Malaysia (FRGS/1/2020/SSI0/UTM/02/23).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Ethics Approval
Not applicable.
Consent to Participate
Not applicable.
Consent for Publication
Not applicable.
Conflict of Interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sabri, A.M., Ramli, M.A., Abdul Rahman, N.N. et al. Three-Dimensional (3D) Printing of Organs according to the Perspective of Islamic Law. ABR 15, 69–80 (2023). https://doi.org/10.1007/s41649-022-00210-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41649-022-00210-9