Abstract

Abstract—Generator set (genset) is a backup power supply which is used when the PLN supply is off. With such an important function, the generator set maintenance must be taken care of for long life durability. Monitoring activity is usually conducted on a regular basis, but still run manually by relying on operators who go directly to the plant. This research goes over the making of HMI remote control system for generator set in order to produce effective and continuous reporting. HMI is designed by Microsoft Visual Studio 2012 software with C # programming language. The data communication used is serial asynchronous wireless communication using 3DR Telemetry 433MHz. The prototype generator set uses an Atmega16 microcontroller which is programmed by CodeVision AVR 2.05.3. Daily data storage and reports use Microsoft Excel. Based on the tests performed, it can be concluded that the HMI system works well. The HMI monitoring system can accurately monitor the plant on fuel percentage and data difference of 1 celcius degree at temperature. The alarm test works well. The farthest test resulted was 84.6 meters. In testing data storage and daily reports all the required information can be stored properly.