Review of modern methods for improving complex properties of cu-cr alloy [Book Review]

, , &

Abstract

This article describes modern techniques for producing a Cu-Cr alloy for various applications. From modern articles, the latest methods of alloying with elements are described, which allow improving the strength characteristics at the same time, while maintaining or even increasing the electrical conductivity of the alloy. As another method for improving the properties of an alloy, applications of severe plastic deformation are described in detail.

Categories

Add categories

Keywords

Reprint years

Links

PhilArchive



    Upload a copy of this work     Papers currently archived: 93,642

External links

Setup an account with your affiliations in order to access resources via your University's proxy server

Through your library

  • Only published works are available at libraries.

My notes

Similar books and articles

An X-ray absorption spectroscopy investigation of the local atomic structure in Cu–Ni–Si alloy after severe plastic deformation and ageing.H. Azzeddine, M. Harfouche, L. Hennet, D. Thiaudiere, M. Kawasaki, D. Bradai & T. G. Langdon - 2015 - Philosophical Magazine 95 (23):2482-2490.
The role of internal stresses on the plastic deformation of the Al–Mg–Si–Cu alloy AA6111.H. Proudhon, W. J. Poole, X. Wang & Y. Bréchet - 2008 - Philosophical Magazine 88 (5):621-640.
Cyclic deformation and fatigue cracking behaviors of Cu–28wt%Ag binary alloy.Y. Z. Tian, Z. F. Zhang & Z. G. Wang - 2009 - Philosophical Magazine 89 (21):1715-1730.
The activation and the spreading of deformation in a fully lamellar Ti–47 at.% Al–1 at.% Cr–0.2 at.% Si Alloy.J. B. Singh, G. Molénat, M. Sundararaman, S. Banerjee, G. Saada, P. Veyssière & A. Couret - 2006 - Philosophical Magazine 86 (16):2429-2450.
The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron.J. O. Agunsoye - 2014 - Journal of Minerals and Materials Characterization and Engineering 2:470-483.
A study on the early-stage decomposition in the Al–Mg–Si–Cu alloy AA6111 by electrical resistivity and three-dimensional atom probe.S. Esmaeili, D. Vaumousse, M. W. Zandbergen, W. J. Poole, A. Cerezo & D. J. Lloyd - 2007 - Philosophical Magazine 87 (25):3797-3816.
Deformation behaviour of ultrafine and nanosize-grained Mg alloy synthesized via mechanical alloying.B. W. Chua, L. Lu & M. O. Lai - 2006 - Philosophical Magazine 86 (19):2919-2939.
Discontinuous precipitation with metastableζphase in a Cu–8.6% Sn alloy.Zeng-Jie Wang & Toyohiko J. Konno - 2013 - Philosophical Magazine 93 (8):949-974.
Thermoelectric power of liquid Cu–Sb and Ag–Sb alloy systems.M. Matsuura & K. Suzuki - 1975 - Philosophical Magazine 31 (5):969-973.
Microstructure and mechanical properties of a large-dimensional bulk nanocrystalline-based Fe–Al–Cr alloy prepared by an aluminothermic reaction casting and followed annealing at 1000°C.Peiqing La, Hongding Wang, Xuemei Liu, Yupeng Wei & Huisheng Jiao - 2013 - Philosophical Magazine 93 (17):2207-2218.

Analytics

Added to PP
2022-09-01

Downloads
2 (#1,450,151)

6 months
2 (#1,816,284)

Historical graph of downloads

Sorry, there are not enough data points to plot this chart.
How can I increase my downloads?

Citations of this work

No citations found.

Add more citations

References found in this work

No references found.

Add more references