Abstract

Premature birth or low birth weight (LBW) is predictor of infant morbidity and mortality. Generally, infant with premature birth will be treated on incubator device. Incubator must provide stable levels of temperature, relative humidity and oxygen concentration. Temperature on infant incubator must be maintaned around 36°C-38°C. In order to control that, adaptive Fuzzy- PI controller is proposed and implemented on infant incubator’s prototype. This research use DHT11 sensor as sensing element and the control method are actuated by lightbulbs. The controller used Microcontroller Atmega16 as processor which output determines the amount of power supplied to the lightbulb by employing pulse width modulation and MOSFET triggered circuit. Tests were carried out on temperature references that correspond to the standard incubator temperature range of 36°C to 38°C. References changes (fluctuatif reference) test and disturbances test were also carried out to prove system performance. The tests result on fixed reference temperatures were able to reach a stable setpoint with time rise (tr) around the 200 second with the highest overshoot maximum steady state error below 5%. References change tests and disturbances test successfully proved the controller was able to follow changes in references and overcome the disturbances