The ethics of technology deals with the moral grounds of creating and using devices and technological systems. This paper deals with the ethics of technology from the point of view of postphenomenology – by analysing multistability, mediation and technological intentionality – and of Wittgenstein’s fundamental grammar – by analysing technology as a rule-governed practice. Using these theoretical frameworks, this paper is able to offer a description of the way ethical values are embedded in technology and to (...) present the foundation for a normative ethics of technology. (shrink)

This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling (...) technology. I call attention to a “positivist problem” that has to do with the connection between the design context and the use context, which VSD seems to presuppose, and I argue that it is necessary to clearly distinguish between the two, since the designers’ intentions do not always correspond with the users’ practice; in fact, the relation between design and use is very complex and principally unpredictable. Thus, a design theory must accept that foresight is limited to anticipation rather than prediction. To overcome the positivist problem, I suggest a phenomenological approach to technology inspired by Don Ihde’s concept of multistability. This argument, which is general in nature and thus applies to any theory of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics. (shrink)

Technology design has social as well as technical determinants. These social factors, such as the political context and social philosophy, vary historically and cross-nationally. The work upon which this paper is based addresses the nature of process technology design in the United States and focuses on the underlying assumptions that guide technology design, based on both historical analysis and survey and case studies of current design practices. Central to this work is an (...) analysis of how the US approaches compare to some of the other industrial nations and the assumptions and implications of different social design concepts such as human-centered design, skill-based design, and human factors. (shrink)

3D printing or additive manufacturing is a novel method of manufacturing parts directly from digital model using layer-by-layer material build-up approach. This tool-less manufacturing method can produce fully dense metallic parts in short time, with high precision. Features of additive manufacturing like freedom of part design, part complexity, light weighting, part consolidation, and design for function are garnering particular interests in metal additive manufacturing for aerospace, oil and gas, marine, and automobile applications. Powder bed fusion, in which each (...) powder bed layer is selectively fused using energy source like laser, is the most promising additive manufacturing technology that can be used for manufacturing small, low-volume, complex metallic parts. This review presents overview of 3D Printing technologies, materials, applications, advantages, disadvantages, challenges, economics, and applications of 3D metal printing technology, the DMLS process in detail, and also 3D metal printing perspectives in developing countries. (shrink)

The aim of this work is to provide a way to investigate design practices that allows a focus on the movements and the transformations that lie behind designed products, which usually lose contact with their own original conditions of design and production. Through a detailed analysis of the design of a new artifact and in contrast with reductionist accounts of design practices, the notion of thing is introduced in a twofold meaning: a gathering of (...) different elements and a problematic issue in process of definition. In investigating the relationship between these two folds lying behind the making of a new artifact, two underlying logics and tendencies are individualized and discussed in detail. These are objectifying and thinging tendencies. A discussion of how the proposed framework contribute to design studies and practices is offered in the conclusion. (shrink)

This paper presents a possibilistic conception of technological artifacts facing technological determinism. Technological artifacts are considered points in a space of pragmatic possibilities determined by the abilities of different sociocultural aspects. The determination process of one possibility is the design of an artifact that comes true as long as the abilities are effective. A design is a process of creation at several levels of reality: material, functional, usefulness. At the same time, the idea of design may also (...) include the social participation of the community, which hereby collectively expresses its desires. This proposed alternative responds to determinism as well as to social constructivism. (shrink)

Fundamental questions in value sensitive design include whether and how high-tech products/artefacts could embody values and ethical ideals, and how plural and incommensurable values of ethical and social importance could be chosen rationally and objectively at a collective level. By using a humanitarian cargo drone study as a starting point, this paper tackles the challenges that VSD’s lack of commitment to a specific ethical theory generates in practical applications. Besides, it highlights how mainstream ethical approaches usually related to VSD (...) are incapable of solving main ethical dilemmas raised by technological design for well-being in democratic settings. Accordingly, it is argued that VSD’s ethical-democratic import would substantially be enhanced by the espousal of a procedural ethics stance and the deliberative approach to value and welfare entailed by Amartya Sen’s capability approach. Differently from rival ethical–political theories, its normative and meta-ethical foundations better handle human diversity, value-goal pluralism, conflicting vested interests as well as the epistemic-moral disagreements typical of contemporary complex democracies. Particularly, Sen’s capability approach procedural-deliberative tenets result in an “objective-impartial” choice procedure selecting a “hierarchy” of plural incommensurable values and rational goals thus, suitable to validate an applied science such as welfare-oriented technological design in concrete social environments. Conclusions suggest that refining VSD with a capability-based procedural approach to ethics fosters the concern for democracy and social justice while preserving vital scientific-technical standards. Major advantages are at an applied level to delivering ethically and socially justified, but yet highly functional technologies and high-tech products/artefacts. (shrink)

New approaches in the design of information technologies for work practices are drawing upon theories from sociology, anthropology, and social philosophy. Under the labels of Computer-Supported Cooperative Work and Participatory Design, work is done to "neturn" to design insights gained in the social study of the use of technological artifacts. Aftera brief introduction of these developments, the article zooms in on those authors for whom "better" technologies refer to hopes for more democratic and more worker-oriented workplaces. (...) How do these approaches conceptualize "humans, " "machines, " and their interrelation in work practices? The conceptual engine which generates the analytical and political power of this approach, I argue, thrives upon the assertion of an ontological difference between the realms of "technology" and "human work. " What are the consequences of such conceptualizations for design? How do different ways of depicting "technology" and "work practice" yield different politics of technology? (shrink)

Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of ‘outsiders’ in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which (...) we first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field. (shrink)

Community technology design has been deeply affected by paradigm shifts and dominant discourses of its seminal disciplines, such as Human Computer Interaction, Cultural and Design theories, and Community Development as reflected in Community Narratives. A particular distinction of community technology design endeavours has been their cultural stance, which directs the agendas, interactions, and outcomes of the collaboration. Applying different cultural lenses to community technology design, shifts not only practices but also directs the (...) levels of awareness, thereby unfolding fundamentally distinct cultural engagement approaches. Previous community technology design research indulged in cross-, inter-, and multicultural approaches to community engagement; it was occupied with meticulously deconstructing and reconstructing perspectives, interactions, roles, and agendas. We argue that when deeply immersed in joint design activities in long-term collaborations, we look beyond individual cultures and enter a transcultural mode of engagement. A transcultural community technology design endeavour supports a continuous creation and re-creation of new meanings, originating from individual entities yet being diffused and continuously reflected within the existing design space. We suggest that within community technology design, a context with abundant cultural diversity, a heightened awareness becomes a necessity. We exemplify different instantiations of the cultural engagement approaches within our long-term collaborations and technology design projects with indigenous communities in Malaysian Borneo and Namibia. A transcultural approach to indigenous knowledge preservation and digitisation efforts with indigenous communities opens up a controversial debate about protecting versus integrating local epistemologies. (shrink)

Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of ‘outsiders’ in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which (...) we first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field. (shrink)

Contemporary design practices, such as participatory design, human-centered design, and codesign, have inherent ethical qualities, which often remain implicit and unexamined. Three design projects in the high-tech industry were studied using three ethical traditions as lenses. Virtue ethics helped to understand cooperation, curiosity, creativity, and empowerment as virtues that people in PD need to cultivate, so that they can engage, for example, in mutual learning and collaborative prototyping. Ethics of alterity helped to understand human-centered (...) class='Hi'>design as a fragile encounter between project team members and prospective users, and foregrounds the ethics in these encounters: our tendencies to “grasp the other” and to “program invention.” And pragmatist ethics helped to understand codesign as a process of joint inquiry and imagination, involving the organization of iterative processes of problem setting and solution finding, with moral qualities. When we open the “black boxes” of design practices, we find them filled with ethics. Moreover, it is proposed that design practitioners need to make explicit their practices’ inherent ethical qualities and that they can do that by embracing reflexivity. (shrink)

While engineering ethics usually addresses the responsibility of engineers in rare cases of whistle blowing, the authors broach the question to what extent engineers can be held responsible in normal practice. For this purpose, they define the conditions under which individuals can be imputable as they prevail in ethics and common sense. From outcomes of science and technology studies research, the authors conclude that these conditions are seldom met in modern technoscientific research practice. By examining such practice in a (...) case study and comparing the results with perceptions of engineers on social responsibility as expressed in interviews, the authors are able to demonstrate that a change in structural characteristics of this practice, such as funding rules, stimulates engineers to attune the inner politics of science to wider societal policies and concerns, and it helps them to overcome the shifting of social responsibility to others as a consequence of the lack of agency they usually perceive. (shrink)

This book discusses concepts of good design from social perspectives grounded in anthropology, sociology and philosophy, the goal being to provide readers with an awareness of social issues to help them in their work as design professionals. Each chapter covers a specific area of good practice in design, explaining and applying a small set of related concepts to a series of case studies, and including a list of additional sources recommended for further study. The book does not (...) assume any specialized, technical background knowledge; it is not a how-to book that offers technical instruction. Yet, it focuses on the assessment of designs, addressing concepts qualitatively. Based on an established university course on Design and Society at the Centre for Society, Technology, and Values that the author offers for students from a variety of disciplines, the book represents a valuable resource for students in engineering, architecture and industrial design – helping prepare them for careers as design professionals – and for all readers in design-related professions interested in understanding a side of design that they may well never have considered systematically. Because of its broad scope and non-technical presentation style, the book may also appeal to general readers interested in social issues in design and technology. (shrink)

Ethics and Educational Technology explores the creation and implementation of learning technologies through an applied ethical lens. The success of digital tools and platforms in today's multifaceted learning and performance contexts is dependent not only on effective design and pedagogical principles but, further, on an awareness of these technologies' interactions with and implications for users and social systems. This first-of-its-kind book provides an evidence-based, process-oriented model for ethics in technology-driven instructional design and development, one that necessitates (...) intentional reflective practice, a critical and theoretically informed interrogation of technology, and a participatory, emancipatory approach to technology design and applications. Rich with real-world ethics examples and design cases, supported by reflection questions and applied activities, and attentive to ethical codes among preeminent educational technology organizations, this is an ideal resource for students, faculty, researchers, and professionals across educational technology, instructional design, learning sciences, learning engineering, organizational training, and other disciplines. (shrink)

This article offers several contributions to the interdisciplinary project of responsible research and innovation in data science and AI. First, it provides a critical analysis of current efforts to establish practical mechanisms for algorithmic auditing and assessment to identify limitations and gaps with these approaches. Second, it provides a brief introduction to the methodology of argument-based assurance and explores how it is currently being applied in the development of safety cases for autonomous and intelligent systems. Third, it generalises this method (...) to incorporate wider ethical, social, and legal considerations, in turn establishing a novel version of argument-based assurance that we call ‘ethical assurance.’ Ethical assurance is presented as a structured method for unifying the myriad practical mechanisms that have been proposed. It is built on a process-based form of project governance that enlists reflective innovation practices to operationalise normative principles, such as sustainability, accountability, transparency, fairness, and explainability. As a set of interlocutory governance mechanisms that span across the data science and AI lifecycle, ethical assurance supports inclusive and participatory ethical deliberation while also remaining grounded in social and technical realities. Finally, this article sets an agenda for ethical assurance, by detailing current challenges, open questions, and next steps, which serve as a springboard to build an active (and interdisciplinary) research programme as well as contribute to ongoing discussions in policy and governance. (shrink)

This study is based on the background of how artificial intelligence technology is applied to the field of creativity and design education to improve the design vision, teaching methods, and actual design productivity of practitioners. The purpose of the research is to compare traditional design education and new design education methods combined with AI technology. Taking the Technological Pedagogical Content Knowledge technology integration model as the starting point, a comprehensive evaluation is selected (...) for different types of research to explore the animation design professional courses in design education, the content of students’ perception preferences, and the evaluation of ease of learning so as to conduct research and analyze AI technology. Design new education strategies and practice methods under the background. In the research, a comparative experimental study was conducted on 40 first-year students majoring in animation design. The results show that through online design studio project practice, with personalized project learning guidance, the learning needs of students to show a better trend, and customized learning and project practice content can enhance the learning experience and performance of students. In the future, we can further expand the scope of analysis, include more case studies, and conduct more comprehensive research, including how to deal with the expansion of the platform for students’ learning of design in situations similar to coronavirus disease 2019 that profoundly affects our lives, and how the project is applied in practice. (shrink)

The decolonial theory understands that Western Modernity keeps imposing itself through a triple mutually reinforcing and shaping imprisonment: coloniality of power, coloniality of knowledge, and coloniality of being. Technical design has an essential role in either maintaining or overcoming coloniality. In this article, two main approaches to decolonizing the technical design are presented. First is Yuk Hui’s and Ahmed Ansari’s proposals that, revisiting or recovering the different histories and philosophies of technology produced by humankind, intend to decolonize (...) the minds of philosophers and engineers/architects/designers as a pre-condition for such decolonial designs to take place. I call them top-down approaches. Second is some technical design initiatives that, being developed alongside marginalized/subalternate people, intend to co-construct decolonial sociotechnical solutions through a committed, decolonizing, and careful dialog of knowledge. I call them bottom-up approaches. Once that is done, the article’s second half derives ontological, epistemological, and political consequences from the conjugation of top-down and bottom-up approaches. Such consequences challenge some established or not yet entirely overcome understandings in the philosophy of technology and, in so doing, are meant to represent some steps in PT’s decolonization. Even though both top-down and bottom-up approaches are considered, the article’s main contributions are associated with decolonial technical design practices, whose methodologies and outcomes are important study cases for PT and whose practitioners can be taken as inspiring examples for philosophers who want to decolonize/enlarge PT or make it decolonial. (shrink)

PurposeThe purpose of this paper is to develop a critique of value sensitive design (VSD) and to propose an alternative approach that does not depart from a heuristic of value(s), but from virtue ethics, called virtuous practice design (VPD).Design/methodology/approachThis paper develops a philosophical argument, draws from a philosophical method (i.e. virtue ethics) and applies this method to a particular case study that draws from a narrative interview.FindingsIn this paper, authors show how an approach that takes virtue instead (...) of value as the central notion for aiming at a design that is sensitive to ethical concerns can be fruitful both in theory and in practice.Originality/valueThis paper presents the first attempt to ground an approach aimed at ethical technology design on the tradition of virtue ethics. As such, it presents VPD as a potentially fruitful alternative to VSD. (shrink)

The field of educational technology ethics is still in its early stages and faces several challenges. These challenges include the lack of a systematic theoretical framework and constrained researc...

Inspired by an economic interpretation of the Faustus drama allegorically disclosing the ‘alchemical’ nature of modern economy, the paper presents a critical view on the development of technology as concomitant phenomenon of work practices with particular focus on manufacturing. It starts with a theoretical perspective on the dynamics of creating explicit propositional knowledge and its re-appropriation for practical use. This lays the ground for understanding how technical artefacts emerge from and, in turn, affect social practices. It further (...) helps to understand the development of human reflective action competence and working capacity as most relevant forces of production in complex and dynamic market environments. These relationships are exemplified in some detail by looking at the problematic development and use of IT in manufacturing’s value creating processes. The paper finally advocates reflective attitudes and evolutionary procedures as basic principles for designing useful and useable IT systems according to human needs and for protecting oneself from the Faustian omnipotence delusion of endless and effortless wealth creation. (shrink)

Philosophers have talked to each other about moral issues concerning technology, but few of them have talked about issues of technology and the good life, and even fewer have talked about technology and the good life with the public in the form of recommendation. In effect, recommendations for various technologies are often left to technologists and gurus. Given the potential benefits of informing the public on their impacts on the good life, however, this is a curious state (...) of affairs. In the present paper, I will examine why philosophers are seemingly reluctant to offer recommendations to the public. While there are many reasons for philosophers to refrain from offering recommendations, I shall focus on a specific normative reason. More specifically, it appears that, according to a particular definition, offering recommendations can be viewed as paternalistic, and therefore is prima facie wrong to do so. I will provide an argument to show that the worry about paternalism is unfounded, because a form of paternalism engendered by technology is inevitable. Given the inevitability of paternalism, I note that philosophers should accept the duty to offer recommendations to the public. I will then briefly turn to design ethics, which has reconceptualised the role of philosophers and, in my mind, fitted well with the inevitability of paternalism. Finally, I shall argue that design ethics has to be supplemented by the practice of recommendation if it is to sustain its objective. (shrink)

Regulation by design (RBD) is a growing research field that explores, develops, and criticises the regulative function of design. In this article, we provide a qualitative thematic synthesis of the existing literature. The aim is to explore and analyse RBD's core features, practices, limitations, and related governance implications. To fulfil this aim, we examine the extant literature on RBD in the context of digital technologies. We start by identifying and structuring the core features of RBD, namely the (...) goals, regulators, regulatees, methods, and technologies. Building on that structure, we distinguish between three types of RBD practices: compliance by design, value creation by design, and optimisation by design. We then explore the challenges and limitations of RBD practices, which stem from risks associated with compliance by design, contextual limitations, or methodological uncertainty. Finally, we examine the governance implications of RBD and outline possible future directions of the research field and its practices. (shrink)

Can new technology enhance purpose-driven, democratic dialogue in groups, governments, and societies? Online Deliberation: Design, Research, and Practice is the first book that attempts to sample the full range of work on online deliberation, forging new connections between academic research, technology designers, and practitioners. Since some of the most exciting innovations have occurred outside of traditional institutions, and those involved have often worked in relative isolation from each other, work in this growing field has often failed to (...) reflect the full set of perspectives on online deliberation. This volume is aimed at those working at the crossroads of information/communication technology and social science, and documents early findings in, and perspectives on, this new field by many of its pioneers. -/- CONTENTS: -/- Introduction: The Blossoming Field of Online Deliberation (Todd Davies, pp. 1-19) -/- Part I - Prospects for Online Civic Engagement -/- Chapter 1: Virtual Public Consultation: Prospects for Internet Deliberative Democracy (James S. Fishkin, pp. 23-35) -/- Chapter 2: Citizens Deliberating Online: Theory and Some Evidence (Vincent Price, pp. 37-58) -/- Chapter 3: Can Online Deliberation Improve Politics? Scientific Foundations for Success (Arthur Lupia, pp. 59-69) -/- Chapter 4: Deliberative Democracy, Online Discussion, and Project PICOLA (Public Informed Citizen Online Assembly) (Robert Cavalier with Miso Kim and Zachary Sam Zaiss, pp. 71-79) -/- Part II - Online Dialogue in the Wild -/- Chapter 5: Friends, Foes, and Fringe: Norms and Structure in Political Discussion Networks (John Kelly, Danyel Fisher, and Marc Smith, pp. 83-93) -/- Chapter 6: Searching the Net for Differences of Opinion (Warren Sack, John Kelly, and Michael Dale, pp. 95-104) -/- Chapter 7: Happy Accidents: Deliberation and Online Exposure to Opposing Views (Azi Lev-On and Bernard Manin, pp. 105-122) -/- Chapter 8: Rethinking Local Conversations on the Web (Sameer Ahuja, Manuel Pérez-Quiñones, and Andrea Kavanaugh, pp. 123-129) -/- Part III - Online Public Consultation -/- Chapter 9: Deliberation in E-Rulemaking? The Problem of Mass Participation (David Schlosberg, Steve Zavestoski, and Stuart Shulman, pp. 133-148) -/- Chapter 10: Turning GOLD into EPG: Lessons from Low-Tech Democratic Experimentalism for Electronic Rulemaking and Other Ventures in Cyberdemocracy (Peter M. Shane, pp. 149-162) -/- Chapter 11: Baudrillard and the Virtual Cow: Simulation Games and Citizen Participation (Hélène Michel and Dominique Kreziak, pp. 163-166) -/- Chapter 12: Using Web-Based Group Support Systems to Enhance Procedural Fairness in Administrative Decision Making in South Africa (Hossana Twinomurinzi and Jackie Phahlamohlaka, pp. 167-169) -/- Chapter 13: Citizen Participation Is Critical: An Example from Sweden (Tomas Ohlin, pp. 171-173) -/- Part IV - Online Deliberation in Organizations -/- Chapter 14: Online Deliberation in the Government of Canada: Organizing the Back Office (Elisabeth Richard, pp. 177-191) -/- Chapter 15: Political Action and Organization Building: An Internet-Based Engagement Model (Mark Cooper, pp. 193-202) -/- Chapter 16: Wiki Collaboration Within Political Parties: Benefits and Challenges (Kate Raynes-Goldie and David Fono, pp. 203-205) -/- Chapter 17: Debian’s Democracy (Gunnar Ristroph, pp. 207-211) -/- Chapter 18: Software Support for Face-to-Face Parliamentary Procedure (Dana Dahlstrom and Bayle Shanks, pp. 213-220) -/- Part V - Online Facilitation -/- Chapter 19: Deliberation on the Net: Lessons from a Field Experiment (June Woong Rhee and Eun-mee Kim, pp. 223-232) -/- Chapter 20: The Role of the Moderator: Problems and Possibilities for Government-Run Online Discussion Forums (Scott Wright, pp. 233-242) -/- Chapter 21: Silencing the Clatter: Removing Anonymity from a Corporate Online Community (Gilly Leshed, pp. 243-251) -/- Chapter 22: Facilitation and Inclusive Deliberation (Matthias Trénel, pp. 253-257) -/- Chapter 23: Rethinking the ‘Informed’ Participant: Precautions and Recommendations for the Design of Online Deliberation (Kevin S. Ramsey and Matthew W. Wilson, pp. 259-267) -/- Chapter 24: PerlNomic: Rule Making and Enforcement in Digital Shared Spaces (Mark E. Phair and Adam Bliss, pp. 269-271) -/- Part VI - Design of Deliberation Tools -/- Chapter 25: An Online Environment for Democratic Deliberation: Motivations, Principles, and Design (Todd Davies, Brendan O’Connor, Alex Cochran, Jonathan J. Effrat, Andrew Parker, Benjamin Newman, and Aaron Tam, pp. 275-292) -/- Chapter 26: Online Civic Deliberation with E-Liberate (Douglas Schuler, pp. 293-302) -/- Chapter 27: Parliament: A Module for Parliamentary Procedure Software (Bayle Shanks and Dana Dahlstrom, pp. 303-307) -/- Chapter 28: Decision Structure: A New Approach to Three Problems in Deliberation (Raymond J. Pingree, pp. 309-316) -/- Chapter 29: Design Requirements of Argument Mapping Software for Teaching Deliberation (Matthew W. Easterday, Jordan S. Kanarek, and Maralee Harrell, pp. 317-323) -/- Chapter 30: Email-Embedded Voting with eVote/Clerk (Marilyn Davis, pp. 325-327) -/- Epilogue: Understanding Diversity in the Field of Online Deliberation (Seeta Peña Gangadharan, pp. 329-358). -/- For individual chapter downloads, go to odbook.stanford.edu. (shrink)

Applications of artificial intelligence/machine learning in health care are dynamic and rapidly growing. One strategy for anticipating and addressing ethical challenges related to AI/ml for health care is patient and public involvement in the design of those technologies – often referred to as ‘co-design’. Co-design has a diverse intellectual and practical history, however, and has been conceptualized in many different ways. Moreover, AI/ml introduces challenges to co-design that are often underappreciated. Informed by perspectives from critical data (...) studies and critical digital health studies, we review the research literature on involvement in health care, and involvement in design, and examine the extent to which co-design as commonly conceptualized is capable of addressing the range of normative issues raised by AI/ml for health care. We suggest that AI/ml technologies have amplified and modified existing challenges related to patient and public involvement, and created entirely new challenges. We outline three pitfalls associated with co-design for ethical AI/ml for health care and conclude with suggestions for addressing these practical and conceptual challenges. (shrink)

Manufacturing and industry practices are undergoing an unprecedented revolution as a consequence of the convergence of emerging technologies such as artificial intelligence, robotics, cloud computing, virtual and augmented reality, among others. This fourth industrial revolution is similarly changing the practices and capabilities of operators in their industrial environments. This paper introduces and explores the notion of the Operator 4.0 as well as how this novel way of conceptualizing the human operator necessarily implicates human values in the technologies that (...) constitute it. The design approach known as value sensitive design (VSD) is used to explore how these Operator 4.0 technologies can be designed for human values. Expert elicitation surveys were used to determine the values of industry stakeholders and examples of how the VSD methodology can be adopted by engineers in order to design for these values is illustrated. The results provide preliminary adoption strategies that industrial teams can take to Operator 4.0 technology for human values. (shrink)

A long tradition of discourse and practice claims that technology designers need to take note of the characteristics and aspirations of potential users in design. Practitioners in the field of user-centered design have developed methods to facilitate this process. These methods represent interesting vehicles for the pursuit of normative politics of technology. In this article, the authors use a case study of the introduction and use of UCD methods in Australia to explore the politics of getting (...) the methods to work in practice. Drawing on the work of Bruno Latour and Marc Berg, the authors argue that UCD methods are tools for engendering new forms of socio-technical relations. However, their normative potential does not arise out of their ability to manipulate abstract categories such as user, technology, and workplace. Instead, it arises out of the complex and unpredictable socio-technical mixes that are generated when people attempt to put them into practice. (shrink)

Practices such as mindfulness, introspection, and self-reflection are known to have positive short and long-term effects on health and well-being. However, in today’s modern, fast-paced, technological world tempted by distractions these practices are often hard to access and relate to a broader audience. Consequently, technologies have emerged that mediate personal experiences, which is reflected in the high number of available applications designed to elicit positive changes. These technologies elicit positive changes by bringing users’ attention to the self – (...) from technologies that show representation of quantified personal data, to technologies that provide experiences that guide the user closer in understanding the self. However, while many designs available today are either built to support or are informed by these aforementioned practices, the question remains: how can we most effectively employ different design elements and interaction strategies to support positive change? Moreover, what types of input and output modalities contribute to eliciting positive states? To address these questions, we present here a state of the art scoping review of immersive interactive technologies that serve in a role of a mediator for positive change in users. We performed a literature search using ACM Digital Library, Web of Science, IEEE Xplore, and Design and Applied Arts Index (beginning of literature – January 1, 2018). We retrieved English-language articles for review, and we searched for published and unpublished studies. Risk of bias was assessed with Downs and Black 26-item QAT scale. We included 34 articles as relevant to the literature, and the analysis of the articles resulted in 38 instances of 33 immersive, interactive experiences relating to positive human functioning. Our contribution is threefold: First we provide a scoping review of immersive interactive technologies for positive change; Second, we propose both a framework for future designs of positive interactive technologies and design consideration informed by the comparative analysis of the designs; Third, we provide design considerations for immersive, interactive technologies to elicit positive states and support positive change. (shrink)

When should a surveillance system that is used in preventive policing sacrifice the privacy of citizens to prevent criminality? What should be the impact of individual moral expectations when a social media platform designs an algorithm? To what degree can we use technology-driven deception in dementia care practices? And can we create a moral compass for a dashboard society? Over the last decade, the impact of technological innovation has been unprecedented. It has profoundly changed the way we participate (...) and interact in society. It has also led to new moral challenges. Not only because of the technology itself, but also because this technology is used in the context of a globalised world with a more prominent role for the private sector. This can result in moral confusion: individuals who alternately assume the role of citizen and consumer feel unable to influence the design of technology that has a strong impact on their core values. Sustaining this moral confusion is in nobody's long-term interest. In this book, we propose to overcome this moral confusion by using a bottom-up design approach that incubates ethics when constructing new technologies. This book is composed of four parts. In the first part we focus on how to integrate moral decisions and morality in the design process of new technology. In the second part we assess how moral design relates to related discourse, including business ethics, law and policy. In the third part of this book various case studies are highlighted that focus on particular moral design issues at the crossroads of technological innovation in the public and private sector. In the last part we look ahead and discuss what the future might look like if we use moral design as a central approach in creating new technology. This book is relevant for IT and engineering professionals, business leaders and policymakers with innovation in their portfolios, and students of (applied) science who are interested in the moral design of technology. The chapters are written by experts and leading researchers in an attractive, accessible and practical writing style. Each chapter offers colourful examples and challenges the reader to critically think through moral decision-making and the design of innovation"--Page 4 of cover. (shrink)

Mixed reality is an increasingly prevalent technology that merges digital simulations with physical objects or environments. This article presents principles for the design of mixed reality compositions. The principles are illustrated by projects and experiments by the author involving architecture and robotics.

This book is an essential contribution to the transdisciplinary field of critical design studies. The essays in this collection locate design at the center of a series of interrelated planetary crises, from climate change, nuclear war, and racial and geopolitical violence to education, computational culture, and the loss of the commons. In doing so, the essays propose a range of needed interventions in order to transform design itself and its role within the shifting realities of a planetary (...) crisis. It challenges the widely popular view that design can contribute to solving world problems by exposing how this attitude only intensifies the problems we currently face. In this way, the essays critique the dominant modes of framing the meaning and scope of design as a largely Anglo-European "problem-solving" practice. By drawing on post-development theory, decolonial theory, black studies, continental philosophy, science and technology studies and more, the contributions envision a critical and speculative practice that problematizes both its engagement with planet and itself. The essays in this collection will appeal to design theorists and practitioners alike, but also to scholars and students generally concerned with how the past and future of design is implicated in the unfolding complexity of ecological devastation, racial and political violence, coloniality, technological futures, and the brutality of modern western culture generally. (shrink)

Technologies fulfill a social role in the sense that they influence the moral actions of people, often in unintended and unforeseen ways. Scientists and engineers are already accepting much responsibility for the technological, economical and environmental aspects of their work. This article asks them to take an extra step, and now also consider the social role of their products. The aim is to enable engineers to take a prospective responsibility for the future social roles of their technologies by providing them (...) with a matrix that helps to explore in advance how emerging technologies might plausibly affect the reasons behind people’s (moral) actions. On the horizontal axis of the matrix, we distinguished the three basic types of reasons that play a role in practical judgment: what is the case, what can be done and what should be done. On the vertical axis we distinguished the morally relevant classes of issues: stakeholders, consequences and the good life. To illustrate how this matrix may work in practice, the final section applies the matrix to the case of the Google PowerMeter. (shrink)

Educational technology is controversial - some see it as essential to providing free global learning, others view it as a dangerous distraction that undermines good education. In both instances, most theories that have previously been applied to educational technology do not account for the distinctive nature and vast potential of technology. This book addresses this issue, exploring how education has been bound up with technology from the beginning, and recognising that educational aims have already been shaped (...) by technologies. Offering a 'dialogic' theory of educational technology, Rupert Wegerif and Louis Major respond to contemporary challenges to education within this book, including, but not limited to, climate change, misinformation on the internet and the impact of Artificial Intelligence (AI). Chapters introduce, discuss, and contextualise key theories and illustrate through case studies their uses within a diverse range of educational contexts, spanning from primary education to adult lifelong learning. Each chapter also concludes with a short summary, demonstrating how these theories translate to practical implications for design. A fascinating response to current developments in educational technology, this is a crucial read for all involved in creating, researching, or making decisions about the use of technologies within educational contexts. (shrink)

Among the many teaching methods, inquiry-based teaching is considered to be an effective way for students to learn and solve problems on their own. However, most of the research related to inquiry-based teaching and learning has concentrated mainly on K-12 education, while few to no studies have focused on the application of inquiry-based teaching and learning in project design courses at university level. Therefore, in order to expand the understanding of the application effect of inquiry-based teaching at university level, (...) this study adopted the quasi-experimental design method, and through the purposive sampling method, 20 students from the Department of Fashion Design at a University of Science and Technology were invited to participate in this study. During the 9-month period, teaching experiments were carried out using two inquiry models, QC/ADEAC and QD/ODEAC. First, when participants were thinking of a creative topic, they followed the process: Question, Collection/Analysis, Discussion, Explanation, Amendment, and Confirmation in the course. During the production process, the participants were allowed to improve on their work through the process of Question, Doing/Observation, Discussion, Explanation, Amendment, and Confirmation. The teacher became a true guide, so that the participants could explore and work out how to improve their designs through independent inquiry and practice. In this study, questionnaires were administered to participants at five important stages of the design project: “theme development,” “color development,” “first Work,” “second Work,” and “third Work.” The results of the five surveys showed that the participants’ curriculum interest, curriculum value perception, and curriculum confidence in the inquiry program all increased. (shrink)

The use of technology and teaching techniques derived from technology is currently a bourgeoning topic in higher education. Teachers at all levels and types of institutions want to know how these new technologies will affect what happens in and outside of the classroom. Many teachers have already embraced some of these technologies but remain uncertain about their educational efficacy. Other teachers have waited because they are reluctant to try tools or techniques that remain unproven or, as is often (...) the case, lack institutional support. This book is designed to help both groups, so that those with technological expertise can extend their knowledge, while technological novices can "ramp up" at their own pace and for their own purposes. Best Practices for Technology-Enhanced Teaching and Learning brings together expert teacher-scholars who apply and assess technology's impact on traditional, hybrid or blended, or completely on-line courses, relying on technology as a teaching tool for classroom management and interaction, as well as student-based uses of technology largely independent of instructors. Each chapter will address how technological improvements can be connected to assessment initiatives, as is now routinely advocated in psychology and social science education. The book features current scholarship and pedagogy involving innovative technology that impacts on student learning in psychology and related disciplines, focusing also on student reactions to these novel technologies, and proper assessments of how well they promote learning. This text will serve as the standard reference on emerging technologies for undergraduate instructors. (shrink)

A mobile-based messaging app (MMA) was implemented as a teachers’ community of practice in the Indian context through a large-scale educational initiative. The development process adopted a Design-based Research approach to test underlying theories in real-world settings. The researchers theorised the pedagogical affordances of the MMA Telegram using Davis and Chouinard's theoretical framework of affordances, defined as a relational process among users, designers, the environment, and the artefact. This paper discusses the iterative design process in detail. The findings (...) showed that the MMA encourages accessibility and for teachers to showcase their practice in the online community of practice and refuses (does not allow) the development of the online community of practice as an epistemic community. (shrink)

We live in a world of technologies. Classical Philosophy of Science, Philosophy of Technology, Episte- mology, etc. philosophical disciplines appear insufficient for valid reflections on today's world. The Philo- sophy of Engineering and Design (Technological) Actions is seen promising to become a fruitful field of philosophical reflections and is offered from the perspective of the Philosophy of Action and Agency (Practical Philosophy). The foundations of the latter are presented in Part II. In the Part I, the Phi- losophy (...) of Engineering and Design (Technological) Actions is outlined in a comparative with Philo- sophy of Technology, Humanities Philosophy of Technology, Philosophy of Engineering, Philosophy of Science, Epistemology, etc. plane. The paradoxes of E. Feenberg's technique, the interpretation of which is proposed in the part III, are involved for the illustrating of the maintained understanding. In the conclusive part (IV) the general danger of distortive philosophical understandings about the tech- nological common world of today are mentioned. (shrink)

As emerging technologies support new ways in which people relate, ethical discourse is important to help guide designers of new technologies. This article endeavors to do just that by presenting an ethical analysis and design of technology intended to gather and act upon information on behalf of its users. The article elaborates on socio-technological factors that affect the development of technology to support ethical action. Research and practice implications are outlined.

Emerging technologies such as cloud computing, augmented and virtual reality, artificial intelligence and robotics, among others, are transforming the field of manufacturing and industry as a whole in unprecedent ways. This fourth industrial revolution is consequentially changing how operators that have been crucial to industry success go about their practices in industrial environments. This short paper briefly introduces the notion of the Operator 4.0 as well as how this novel way of conceptualizing the human operator necessarily implicates human values (...) in the technologies that constitute it. Similarly, the design methodology known as value sensitive design (VSD) is drawn upon to discuss how these Operator 4.0 technologies can be design for human values and, conversely, how a potential value-sensitive Operator 4.0 can be used to strengthen the VSD methodology in developing novel technologies. (shrink)

Based on two case studies of the design of electronic communication networks developed in the public and private sector, this article explores the barriers within current design cultures to account for the needs and diversity of users. Whereas the constraints on user-centered design are usually described in macrosociological terms, in which the user–technology relation is merely understood as a process of the inclusion or exclusion of users in design, the authors suggest that it is important (...) to adopt a semiotic approach. Moreover, they argue that we need to take into account the gender identity of designers to understand how design practices in ICT prioritize male users. The article shows how configuring the user as “everybody” and the use of the “I-methodology” are important constraints in the development of technologies that aim to reach users in all their diversity. (shrink)

Smart cities are now an established area of technological development and theoretical inquiry. Research on smart cities spans from investigations into its technological infrastructures and design scenarios, to critiques of its proposals for citizenship and sustainability. This article builds on this growing field, while at the same time accounting for expanded urban-sensing practices that take hold through citizen-sensing technologies. Detailing practice-based and participatory research that developed urban-sensing technologies for use in Southeast London, this article considers how the smart (...) city as a large-scale and monolithic version of urban systems breaks down in practice to reveal much different concretizations of sensors, cities, and people. By working through the specific instances where sensor technologies required inventive workarounds to be setup and continue to operate, as well as moments of breakdown and maintenance where sensors required fixes or adjustments, this article argues that urban sensing can produce much different encounters with urban technologies through lived experiences. Rather than propose a “grassroots” approach to the smart city, however, this article instead suggests that the smart city as a figure for urban development be contested and even surpassed by attending to workarounds that account more fully for digital urban practices and technologies as they are formed and situated within urban projects and community initiatives. (shrink)

An accountability-based privacy governance model is one where organizations are charged with societal objectives, such as using personal information in a manner that maintains individual autonomy and which protects individuals from social, financial and physical harms, while leaving the actual mechanisms for achieving those objectives to the organization. This paper discusses the essential elements of accountability identified by the Galway Accountability Project, with scholarship from the Centre for Information Policy Leadership at Hunton & Williams LLP. Conceptual _Privacy by Design_ principles (...) are offered as criteria for building privacy and accountability into organizational information management practices. The authors then provide an example of an organizational control process that uses the principles to implement the essential elements. Initially developed in the ‘90s to advance privacy-enhancing information and communication technologies, Dr. Ann Cavoukian has since expanded the application of _Privacy by Design_ principles to include business processes. (shrink)

It is a truism that the design and deployment of information and communication technologies is vital to everyday life, the conduct of work and to social order. But how are individual, organisational and societal choices made? What might it mean to invoke a politics and an ethics of information technology design and use? This editorial paper situates these questions within the trajectory of preoccupations and approaches to the design and deployment of information technology since computerisation (...) began in the 1940s. Focusing upon the dominant concerns over the last three decades, the paper delineates an interest in design and use in relation to socio-technical theories, situated practices and actor-network theory. It is argued that each of these approaches is concerned with a particular form of politics that does not explicitly engage with ethics. In order to introduce ethics into contemporary debates about information technology, and to frame the papers in the special issue, it is argued that Levinas’ ethics is particularly valuable in problematising the relationship between politics and ethics. Levinas provides a critique of modernity’s emphasis on politics and the egocentric self. It is from a Levinasian concern with the Other and the primacy of the ethical that a general rethinking of the relationship between politics, ethics and justice in relation to information and communication technologies can be invoked. (shrink)

This paper aims to connect Stiegler’s reflections on theoretical computer science with his practical propositions for the design of digital technologies. Indeed, Stiegler’s theory of exosomatization implies a new conception of artificial intelligence, which is not based on an analogical paradigm (which compares organisms and machines, as in cybernetics, or which compares thought and computing, as in cognitivism) but on an organological paradigm, which studies the co-evolution of living organisms (individuals), artificial organs (tools), and social organizations (institutions). Such a (...) perspective does not compare human capacities to machine performances but studies the way in which the evolution of material and technical supports affects and transforms psychological, cognitive or noetic faculties (intuition, memory, understanding, imagination, sensibility, reason, etc.), as well as the constitution of different kinds of knowledge. This new theoretical paradigm implies a new ‘design’ for digital technologies, which considers their social role and their impact on psychological, cognitive or noetic faculties. (shrink)

Current research in artificial intelligence (AI) sheds light on algorithmic bias embedded in AI systems. The underrepresentation of women in the AI design sector of the tech industry, as well as in training datasets, results in technological products that encode gender bias, reinforce stereotypes and reproduce normative notions of gender and femininity. Biased behaviour is notably reflected in anthropomorphic AI systems, such as personal intelligent assistants (PIAs) and chatbots, that are usually feminized through various design parameters, such as (...) names, voices and traits. Gendering of AI entities, however, is often reduced to the encoding of stereotypical behavioural patterns that perpetuate normative assumptions about the role of women in society. The impact of this behaviour on social life increases, as human-to-(anthropomorphic)machine interactions are mirrored in human-to-human social interactions. This article presents current critical research on AI bias, focusing on anthropomorphic systems. Moreover, it discusses the significance of women’s engagement in AI design and programming, by presenting selected case studies of contemporary female media artists and designers. Finally, it suggests that women, through their creative practice, provide feminist and critical approaches to AI design which are essential for imagining alternative, inclusive, ethic and de-biased futures for anthropomorphic AIs. (shrink)

Currently, advancements in information and communication technology and an increased interest in using the Internet for educational purposes have led educators to work in new virtual settings. However, using technology in teaching requires the understanding and information of English educators. Technological Pedagogical Content Knowledge is an educator's knowledge concept regarding integrating technology into education. Also, how educators integrate technology effectively into their classes is a significant issue, as learning environments are influenced by rapid advances in instructional (...) technology. Consistent with this issue, it is critical for teacher development to integrate ICT into educational tasks in the design, application, and assessment of practices in a virtual setting. To this end, the objective of the present review is to consider the role of practice in the virtual platform in developing EFL teachers' TPACK. Ultimately, some implications are presented for the EFL educational stakeholders. (shrink)