This article offers a discussion of the connection between technology and values and, specifically, I take a closer look at ethically sound design. In order to bring the discussion into a concrete context, the theory of Value Sensitive Design (VSD) will be the focus point. To illustrate my argument concerning design ethics, the discussion involves a case study of an augmented window, designed by the VSD Research Lab, which has turned out to be a potentially surveillance-enabling (...) technology. I call attention to a “positivist problem” that has to do with the connection between the design context and the use context, which VSD seems to presuppose, and I argue that it is necessary to clearly distinguish between the two, since the designers’ intentions do not always correspond with the users’ practice; in fact, the relation between design and use is very complex and principally unpredictable. Thus, a design theory must accept that foresight is limited to anticipation rather than prediction. To overcome the positivist problem, I suggest a phenomenological approach to technology inspired by Don Ihde’s concept of multistability. This argument, which is general in nature and thus applies to any theory of design ethics, is intended as a constructive criticism, which can hopefully contribute to the further development of design ethics. (shrink)

Technology design has social as well as technical determinants. These social factors, such as the political context and social philosophy, vary historically and cross-nationally. The work upon which this paper is based addresses the nature of process technology design in the United States and focuses on the underlying assumptions that guide technology design, based on both historical analysis and survey and case studies of current design practices. Central to this work is an analysis (...) of how the US approaches compare to some of the other industrial nations and the assumptions and implications of different social design concepts such as human-centered design, skill-based design, and human factors. (shrink)

The ethics of technology deals with the moral grounds of creating and using devices and technological systems. This paper deals with the ethics of technology from the point of view of postphenomenology – by analysing multistability, mediation and technological intentionality – and of Wittgenstein’s fundamental grammar – by analysing technology as a rule-governed practice. Using these theoretical frameworks, this paper is able to offer a description of the way ethical values are embedded in technology and to (...) present the foundation for a normative ethics of technology. (shrink)

Implicit in the value sensitive design (VSD) approach is a concern for understanding, and where possible, disrupting problematic power relationships. Yet an awareness of the issues and ethics of power relations is a pre-requisite for such a concern to bear fruit. This article provides some insight into the issues, and through a case study of technology design to support care arrangements for age-related cognitive decline, illustrates how finding a satisfactory resolution can be particularly troublesome.

This paper addresses an important multi-disciplinary issue of current interest, that is, the implications of technological design for fairness. A visual, graphical methodology centered on the Taylor-Russell diagram is proposed to address this issue. The Taylor-Russell diagram helps to identify and explore ways in which predictions built into designs can pit the interests of different constituencies against one another. The configuration of the design represents a trade-off between the interests of the communities involved. Whether or not the trade-off (...) is appropriate constitutes a problem of fairness or distributive justice. The breadth of this methodology is supported by a diversity of examples analyzed. These include a surveillance system, an automotive safety system, a civic information system, and the international food distribution system. These examples provide models for application of the methodology to the analysis of designs in further areas of concern. Limitations of the methodology are also discussed. While it helps to identify and clarify issues of fairness in technology design, the methodology does not provide a general theory of fairness, nor can it provide fair solutions to such issues without appeal to further principles or concepts. (shrink)

Safe-by-Design (SBD) frameworks for the development of emerging technologies have become an ever more popular means by which scholars argue that transformative emerging technologies can safely incorporate human values. One such popular SBD methodology is called Value Sensitive Design (VSD). A central tenet of this design methodology is to investigate stakeholder values and design those values into technologies during early stage research and development (R&D). To accomplish this, the VSD framework mandates that designers consult the philosophical (...) and ethical literature to best determine how to weigh moral trade-offs. However, the VSD framework also concedes the universalism of moral values, particularly the values of freedom, autonomy, equality trust and privacy justice. This paper argues that the VSD methodology, particularly applied to nano-bio-info-cogno (NBIC) technologies, has an insufficient grounding for the determination of moral values. As such, an exploration of the value-investigations of VSD are deconstructed to illustrate both its strengths and weaknesses. This paper also provides possible modalities for the strengthening of the VSD methodology, particularly through the application of moral imagination and how moral imagination exceed the boundaries of moral intuitions in the development of novel technologies. (shrink)

New approaches in the design of information technologies for work practices are drawing upon theories from sociology, anthropology, and social philosophy. Under the labels of Computer-Supported Cooperative Work and Participatory Design, work is done to "neturn" to design insights gained in the social study of the use of technological artifacts. Aftera brief introduction of these developments, the article zooms in on those authors for whom "better" technologies refer to hopes for more democratic and more worker-oriented workplaces. How (...) do these approaches conceptualize "humans, " "machines, " and their interrelation in work practices? The conceptual engine which generates the analytical and political power of this approach, I argue, thrives upon the assertion of an ontological difference between the realms of "technology" and "human work. " What are the consequences of such conceptualizations for design? How do different ways of depicting "technology" and "work practice" yield different politics of technology? (shrink)

Fundamental questions in value sensitive design include whether and how high-tech products/artefacts could embody values and ethical ideals, and how plural and incommensurable values of ethical and social importance could be chosen rationally and objectively at a collective level. By using a humanitarian cargo drone study as a starting point, this paper tackles the challenges that VSD’s lack of commitment to a specific ethical theory generates in practical applications. Besides, it highlights how mainstream ethical approaches usually related to VSD (...) are incapable of solving main ethical dilemmas raised by technological design for well-being in democratic settings. Accordingly, it is argued that VSD’s ethical-democratic import would substantially be enhanced by the espousal of a procedural ethics stance and the deliberative approach to value and welfare entailed by Amartya Sen’s capability approach. Differently from rival ethical–political theories, its normative and meta-ethical foundations better handle human diversity, value-goal pluralism, conflicting vested interests as well as the epistemic-moral disagreements typical of contemporary complex democracies. Particularly, Sen’s capability approach procedural-deliberative tenets result in an “objective-impartial” choice procedure selecting a “hierarchy” of plural incommensurable values and rational goals thus, suitable to validate an applied science such as welfare-oriented technological design in concrete social environments. Conclusions suggest that refining VSD with a capability-based procedural approach to ethics fosters the concern for democracy and social justice while preserving vital scientific-technical standards. Major advantages are at an applied level to delivering ethically and socially justified, but yet highly functional technologies and high-tech products/artefacts. (shrink)

Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of ‘outsiders’ in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which we (...) first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field. (shrink)

In a recent paper, Pila has criticised the recommendations made by requirements engineers involved in the design of a grid technology for the support of distributed readings of mammograms made by Jirotka et al. The disagreement between them turns on the notion of ‘biographical familiarity’ and whether it can be a sound basis for trust for the performances of professionals such as radiologists. In the first two sections, the paper gives an interpretation of the position of each side (...) in this disagreement and their recommendation for the design of technology for distributed reading, and in the third the underlying reasons for this disagreement are discussed. It is argued that Pila, in attempting to make room for mistrust as well as trust, brings to the fore the question of having and reflecting upon reasons for trust or mistrust. Pila holds that biographical familiarity is not a sound reason for trust/mistrust, as it seems to obliterate the possibility of mistrust. In response to her proposal, an analysis is proposed of the forms of trust involved in biographical familiarity. In particular, implicit trust is focused upon, as a form of trust in advance of reasons, and as a form of trust contained within other reasons. It is proposed that implicit trust has an important role in establishing an intersubjectively shared world in which what counts as a reason for the acceptability of performances such as readings of x-rays is established. Implicit trust, therefore, is necessary for professionals to enter into a ‘space of reasons’. To insist upon judgements made in the absence of the form of implicit trust at play in biographical familiarity is to demand that radiologists make judgements regarding whether to trust or mistrust on the basis of reasons capable of being reflected upon, but at the same time to leave them without reasons upon which to reflect. (shrink)

Community technology design has been deeply affected by paradigm shifts and dominant discourses of its seminal disciplines, such as Human Computer Interaction, Cultural and Design theories, and Community Development as reflected in Community Narratives. A particular distinction of community technology design endeavours has been their cultural stance, which directs the agendas, interactions, and outcomes of the collaboration. Applying different cultural lenses to community technology design, shifts not only practices but also directs the levels (...) of awareness, thereby unfolding fundamentally distinct cultural engagement approaches. Previous community technology design research indulged in cross-, inter-, and multicultural approaches to community engagement; it was occupied with meticulously deconstructing and reconstructing perspectives, interactions, roles, and agendas. We argue that when deeply immersed in joint design activities in long-term collaborations, we look beyond individual cultures and enter a transcultural mode of engagement. A transcultural community technology design endeavour supports a continuous creation and re-creation of new meanings, originating from individual entities yet being diffused and continuously reflected within the existing design space. We suggest that within community technology design, a context with abundant cultural diversity, a heightened awareness becomes a necessity. We exemplify different instantiations of the cultural engagement approaches within our long-term collaborations and technology design projects with indigenous communities in Malaysian Borneo and Namibia. A transcultural approach to indigenous knowledge preservation and digitisation efforts with indigenous communities opens up a controversial debate about protecting versus integrating local epistemologies. (shrink)

In this issue, Pila (2009) has criticised the recommendations made by requirements engineers involved in the design of a grid technology for the support of distributed readings of mammograms made by Jirotka et al. (2005). The disagreement between them turns on the notion of “biographical familiarity” and whether it can be a sound basis for trust for the performances of professionals such as radiologists. In the first two sections, this paper gives an interpretation of the position of each (...) side in this disagreement and their recommendation for the design of technology for distributed reading, and in the third the underlying reasons for this disagreement are discussed. It is argued that Pila, in attempting to make room for mistrust as well as trust, brings to the fore the question of having and reflecting upon reasons for trust or mistrust. Pila holds that biographical familiarity is not a sound reason for trust/mistrust, as it seems to obliterate the possibility of mistrust. In response to her proposal, an analysis is proposed of the forms of trust involved in biographical familiarity. In particular, implicit trust is focused upon—as a form of trust in advance of reasons, and as a form of trust contained (in the logical sense) within other reasons. It is proposed that implicit trust has an important role in establishing an intersubjectively shared world in which what counts as a reason for the acceptability of performances such as readings of X-rays is established. Implicit trust, therefore, is necessary for professionals to enter into a “space of reasons”. To insist upon judgements made in the absence of the form of implicit trust at play in biographical familiarity is to demand that radiologists (and other relevantly similar professionals) make judgements regarding whether to trust or mistrust on the basis of reasons capable of being reflected upon, but at the same time leave them without reasons upon which to reflect. (shrink)

This research project aims to accomplish two primary objectives: (1) propose an argument that a posthuman ethics in the design of technologies is sound and thus warranted and, (2) how can existent SBD approaches begin to envision principled and methodological ways of incorporating nonhuman values into design. In order to do this this MRP will provide a rudimentary outline of what constitutes SBD approaches. A particular design approach - Value Sensitive Design (VSD) - is taken up (...) as an illustrative example given that it, among the other SBD frameworks, most clearly illustrates a principled approach to the integration of values in design. -/- This explication will be followed by the strongest arguments for a posthumanist ethic, primarily drawing from the works of the Italian philosophers Leonardo Caffo and Roberto Marchesini and Francesa Ferrando. In doing so I will show how the human imperative to account for nonhuman values is a duty and as such must be continually ready-to-hand when making value-critical decision. (shrink)

Following societal and policy pressures for responsible innovation, innovators are more and more expected to consider the broader socio-ethical context of their work, and more importantly, to integrate such considerations into their daily practices. This may require the involvement of ‘outsiders’ in innovation trajectories, including e.g. societal and governmental actors. However, methods on how to functionally organize such integration in light of responsible innovation have only recently started to emerge. We present an approach to do just that, in which we (...) first develop value profiles of the involved actors, and second, design a workshop setting that allows innovators to develop design requirements in collaboration with representatives of parties that are not usually involved in such innovation design practices. Using a case study in automated vehicle development, we positively demonstrate the possibility and utility of our approach. We stress that in this study we wish to demonstrate the functionality of our developed method, and did not search for scientifically valid outcomes regarding this technical field. (shrink)

Andrew Feenberg’s distinction between formal and substantive bias in the design of technology is interrogated. The two dimensions of his definition—inten­tion and the enhancement of specific social interests—are examined and eight logical possibilities arising from his argument are identified. These possibilities are explored through discussion of examples and it is argued that Feenberg has both: a) not broken sufficiently with substantivist philosophies of technology so that he retains ambivalence on technology’s ‘biased essence,’ and b) illegitimately rejected (...) the idea of a technology that is biased in itself. The latter category is important to critical theory of technology and the paper offers a conceptualization of it that draws on Habermas’s discourse ethics. (shrink)

This book discusses concepts of good design from social perspectives grounded in anthropology, sociology and philosophy, the goal being to provide readers with an awareness of social issues to help them in their work as design professionals. Each chapter covers a specific area of good practice in design, explaining and applying a small set of related concepts to a series of case studies, and including a list of additional sources recommended for further study. The book does not (...) assume any specialized, technical background knowledge; it is not a how-to book that offers technical instruction. Yet, it focuses on the assessment of designs, addressing concepts qualitatively. Based on an established university course on Design and Society at the Centre for Society, Technology, and Values that the author offers for students from a variety of disciplines, the book represents a valuable resource for students in engineering, architecture and industrial design – helping prepare them for careers as design professionals – and for all readers in design-related professions interested in understanding a side of design that they may well never have considered systematically. Because of its broad scope and non-technical presentation style, the book may also appeal to general readers interested in social issues in design and technology. (shrink)

ABSTRACTAlthough youth of color, youth from lower socioeconomic brackets, and young women are among the heaviest users of social media technologies, their voices are almost entirely absent from cur...

In this article, we investigate how to explain the difference between traditional design, engineering, and technology—which have exploited nature and put increasing pressure on Earth’s carrying capacity since the industrial revolution—and biomimetic design—which claims to explore nature’s sustainable solutions and promises to be regenerative by design. We reflect on the concept of mimesis. Mimesis assumes a continuity between the natural environment as a regenerative model and measure for sustainable design that is imitated and reproduced in (...) biomimetic design, engineering, and technology. We conceptualize mimesis in terms of two interdependent boundary conditions: differentiation and participation. We subsequently develop four characteristics of biomimicry as regenerative design, engineering, and technology: technological mimesis is 1) a participative differentiation of nature; 2) supplemental to natural mimesis in biomimetic design; 3) the participative differentiation of technological mimesis is constitutive of nature; 4) the participative differentiation of technological mimesis is always limited. (shrink)

The introduction of new energy technologies may lead to public resistance and contestation. It is often argued that this phenomenon is caused by an inadequate inclusion of relevant public values in the design of technology. In this paper we examine the applicability of the value sensitive design approach. While VSD was primarily introduced for incorporating values in technological design, our focus in this paper is expanded towards the design of the institutions surrounding these technologies, as (...) well as the design of stakeholder participation. One important methodological challenge of VSD is to identify the relevant values related to new technological developments. In this paper, we argue that the public debate can form a rich source from which to retrieve the values at stake. To demonstrate this, we have examined the arguments used in the public debate regarding the exploration and exploitation of shale gas in the Netherlands. We identified two important sets of the underlying values, namely substantive and procedural values. This paper concludes with two key findings. Firstly, contrary to what is often suggested in the literature, both proponents and opponents seem to endorse the same values. Secondly, contestation seems to arise in the precise operationalization of these values among the different stakeholders. In other words, contestation in the Dutch shale gas debate does not arise from inter-value conflict but rather from intra-value conflicts. This multi-interpretability should be incorporated in VSD processes. (shrink)

Technology permeates nearly every aspect of our daily lives. Cars enable us to travel long distances, mobile phones help us to communicate, and medical devices make it possible to detect and cure diseases. But these aids to existence are not simply neutral instruments: they give shape to what we do and how we experience the world. And because technology plays such an active role in shaping our daily actions and decisions, it is crucial, Peter-Paul Verbeek argues, that we (...) consider the moral dimension of technology. _Moralizing Technology_ offers exactly that: an in-depth study of the ethical dilemmas and moral issues surrounding the interaction of humans and technology. Drawing from Heidegger and Foucault, as well as from philosophers of technology such as Don Ihde and Bruno Latour, Peter-Paul Verbeek locates morality not just in the human users of technology but in the interaction between us and our machines. Verbeek cites concrete examples, including some from his own life, and compellingly argues for the morality of _things_. Rich and multifaceted, and sure to be controversial, _Moralizing Technology_ will force us all to consider the virtue of new inventions and to rethink the rightness of the products we use every day. (shrink)

This paper presents a possibilistic conception of technological artifacts facing technological determinism. Technological artifacts are considered points in a space of pragmatic possibilities determined by the abilities of different sociocultural aspects. The determination process of one possibility is the design of an artifact that comes true as long as the abilities are effective. A design is a process of creation at several levels of reality: material, functional, usefulness. At the same time, the idea of design may also (...) include the social participation of the community, which hereby collectively expresses its desires. This proposed alternative responds to determinism as well as to social constructivism. (shrink)

In this article, we investigate how to explain the difference between traditional design, engineering, and technology—which have exploited nature and put increasing pressure on Earth’s carrying capacity since the industrial revolution—and biomimetic design—which claims to explore nature’s sustainable solutions and promises to be regenerative by design. We reflect on the concept of mimesis. Mimesis assumes a continuity between the natural environment as a regenerative model and measure for sustainable design that is imitated and reproduced in (...) biomimetic design, engineering, and technology. We conceptualize mimesis in terms of two interdependent boundary conditions: differentiation and participation. We subsequently develop four characteristics of biomimicry as regenerative design, engineering, and technology: technological mimesis is 1) a participative differentiation of nature; 2) supplemental to natural mimesis in biomimetic design; 3) the participative differentiation of technological mimesis is constitutive of nature; 4) the participative differentiation of technological mimesis is always limited. (shrink)

With the emergence of quantum technologies such as quantum computing, quantum communications, and quantum sensing, new potential has emerged for smart manufacturing and Industry 4.0. These technologies, however, present ethical concerns that must be addressed in order to ensure they are developed and used responsibly. This article outlines some of the ethical challenges that quantum technologies may raise for Industry 4.0 and presents the value sensitive design methodology as a strategy for ethics-by-design of quantum computing in Industry 4.0. (...) This research further investigates the potential ethical difficulties that may come from the use of quantum technologies in Industry 4.0, such as concerns about privacy, security, accountability, and the influence of these technologies on workers and society as a whole. The article argues, based on current literature, that these issues necessitate a proactive and comprehensive approach to ethics-by-design. (shrink)

The use of Intelligent Assistive Technology in dementia care opens the prospects of reducing the global burden of dementia and enabling novel opportunities to improve the lives of dementia patients. However, with current adoption rates being reportedly low, the potential of IATs might remain under-expressed as long as the reasons for suboptimal adoption remain unaddressed. Among these, ethical and social considerations are critical. This article reviews the spectrum of IATs for dementia and investigates the prevalence of ethical considerations in (...) the design of current IATs. Our screening shows that a significant portion of current IATs is designed in the absence of explicit ethical considerations. These results suggest that the lack of ethical consideration might be a codeterminant of current structural limitations in the translation of IATs from designing labs to bedside. Based on these data, we call for a coordinated effort to proactively incorporate ethical considerations early in the design and development of new products. (shrink)

Genetic engineering technologies are a subclass of the biotechnology family, and are concerned with the use of laboratory-based technologies to intervene with a given organism at the genetic level, i.e., the level of its DNA. This class of technologies could feasibly be used to treat diseases and disabilities, create disease-resistant crops, or even be used to enhance humans to make them more resistant to certain environmental conditions. However, both therapeutic and enhancement applications of genetic engineering raise serious ethical concerns. This (...) paper examines various objections to genetic engineering (as applied to humans) which have been raised in the literature, and presents a new way to frame these issues, and to look for solutions. Specifically, this paper frames genetic engineering technologies within the ‘design turn in applied ethics’ lens and thus situates these technologies as covarying with societal forces. The value sensitive design (VSD) approach to technology design is then appropriated as the conceptual framework in which genetic engineering technologies can be considered so that they can be designed for important human values. By doing so, this paper brings further nuance to the scholarship on genetic engineering technologies by discussing the sociotechnicity of genetic engineering systems rather than framing them as value-neutral tools that either support or constrain values based on how they are used. (shrink)

Inspired by an economic interpretation of the Faustus drama allegorically disclosing the ‘alchemical’ nature of modern economy, the paper presents a critical view on the development of technology as concomitant phenomenon of work practices with particular focus on manufacturing. It starts with a theoretical perspective on the dynamics of creating explicit propositional knowledge and its re-appropriation for practical use. This lays the ground for understanding how technical artefacts emerge from and, in turn, affect social practices. It further helps to (...) understand the development of human reflective action competence and working capacity as most relevant forces of production in complex and dynamic market environments. These relationships are exemplified in some detail by looking at the problematic development and use of IT in manufacturing’s value creating processes. The paper finally advocates reflective attitudes and evolutionary procedures as basic principles for designing useful and useable IT systems according to human needs and for protecting oneself from the Faustian omnipotence delusion of endless and effortless wealth creation. (shrink)

This paper explores the role of ethics in design. Traditionally, ethical questions have been seen as marginal issues in the design of technology. Part of the reason for this stems from the widely held notion of technology being “out of control.” This notion is a barrier to what I call “ethical design” because it implies that ethics has no role to play in the development of technology. This view, however, is challenged by recent work (...) in the field of Science and Technology Studies (STS). Looking into the dynamics of technological change, STS scholars argue that human choices are present at every stage of a technology’s development and, furthermore, that human values are reflected in the very design of artifacts. This alternative view suggests that ethics can and should be included in the design process. Drawing on examples from the privacy arena. I point to some of the potential advantages of addressing ethical concerns early on in the design of a technology. I conclude with some general strategies for bringing ethics back into design. (shrink)

Philosophers have talked to each other about moral issues concerning technology, but few of them have talked about issues of technology and the good life, and even fewer have talked about technology and the good life with the public in the form of recommendation. In effect, recommendations for various technologies are often left to technologists and gurus. Given the potential benefits of informing the public on their impacts on the good life, however, this is a curious state (...) of affairs. In the present paper, I will examine why philosophers are seemingly reluctant to offer recommendations to the public. While there are many reasons for philosophers to refrain from offering recommendations, I shall focus on a specific normative reason. More specifically, it appears that, according to a particular definition, offering recommendations can be viewed as paternalistic, and therefore is prima facie wrong to do so. I will provide an argument to show that the worry about paternalism is unfounded, because a form of paternalism engendered by technology is inevitable. Given the inevitability of paternalism, I note that philosophers should accept the duty to offer recommendations to the public. I will then briefly turn to design ethics, which has reconceptualised the role of philosophers and, in my mind, fitted well with the inevitability of paternalism. Finally, I shall argue that design ethics has to be supplemented by the practice of recommendation if it is to sustain its objective. (shrink)

Technologies cannot simply be understood as neutral tools or instruments; they embody the values of their creators and may unconsciously reinforce systematic patterns of inequality, discrimination, and oppression. -/- Technology Ethics shows how responsible innovation can be achieved. Demonstrating how design and philosophy converge, the book delves into the intricate narratives that shape our understanding of technology – from instrumentalist views to social constructivism. Yet, at its core, it champions interactionalism as the most promising and responsible narrative. (...) Through compelling examples and actionable tools, this book unravels the nuances of these philosophical positions tailored to foster responsible innovation and thoughtful design. As our everyday lives further intertwine with technology, understanding and implementing these design principles becomes not just beneficial, but essential. -/- This concise and accessible introduction is essential reading for students and scholars of philosophy of technology, engineering ethics, science and technology studies, human-machine communication, as well as policymakers. (shrink)

With increasing flexibility of technology and a shift towards competence being the core of competitive edge in worklife, the need for new organizational concepts or models which givejoint optimization across human and technological dimensions has been acknowledged in leading, innovative enterprises. National crossdisciplinary research based productivity programmes are appearing in several countries. Due to internationalization and the general shortcomings of bureaucratic organizational forms, regional networks of enterprises in cooperation with public R&D institutions seem to provide answers to needs of (...) regions to remain competitive. The paper discusses the possible role of social science in a multilevel, participative strategy for developing new, democratic and productive organizational forms in worklife. Aspects of national productivity programmes in Scandinavia, Germany and Australia are discussed in connection with the situation in Italy as analyzed through some recent research projects. (shrink)

The book concludes that it is a mistake to think of Art as something subjective, or as an arbitrary social representation, and of Technology as an instrumental ..

Creativity is an essential factor in ensuring the sustainable development of a society. Improving students’ creativity has gained much attention in education, especially in Science, Technology, Engineering, Arts, and Mathematics education. In a quasi-experimental design, this study examines the effectiveness of a project-based STEAM program on the development of creativity in Chinese elementary school science education. We selected two fourth-graders classes. One received a project-based STEAM program, and the other received a conventional science teaching over 6 weeks. Students’ (...) creativity was assessed before and after the intervention using a multi-method approach, including a test of divergent thinking, a story completion through the Consensus Assessment Technique, a creative self-efficacy measure, and a group-based creative project. Moreover, all students received a test of their science knowledge after the intervention. The results showed that compared with the control group, the creativity of the experimental group students improved significantly for 6 weeks at both individual and group level, even though their knowledge in science were comparable. This result confirmed the effectiveness of a project-based STEAM educational program improving elementary school students’ creativity. Implications are discussed. (shrink)

The decolonial theory understands that Western Modernity keeps imposing itself through a triple mutually reinforcing and shaping imprisonment: coloniality of power, coloniality of knowledge, and coloniality of being. Technical design has an essential role in either maintaining or overcoming coloniality. In this article, two main approaches to decolonizing the technical design are presented. First is Yuk Hui’s and Ahmed Ansari’s proposals that, revisiting or recovering the different histories and philosophies of technology produced by humankind, intend to decolonize (...) the minds of philosophers and engineers/architects/designers as a pre-condition for such decolonial designs to take place. I call them top-down approaches. Second is some technical design initiatives that, being developed alongside marginalized/subalternate people, intend to co-construct decolonial sociotechnical solutions through a committed, decolonizing, and careful dialog of knowledge. I call them bottom-up approaches. Once that is done, the article’s second half derives ontological, epistemological, and political consequences from the conjugation of top-down and bottom-up approaches. Such consequences challenge some established or not yet entirely overcome understandings in the philosophy of technology and, in so doing, are meant to represent some steps in PT’s decolonization. Even though both top-down and bottom-up approaches are considered, the article’s main contributions are associated with decolonial technical design practices, whose methodologies and outcomes are important study cases for PT and whose practitioners can be taken as inspiring examples for philosophers who want to decolonize/enlarge PT or make it decolonial. (shrink)

We focus on collaborative activities that engage computer graphics designers and social scientists in systems design processes. Our conceptual symmetrical account of technology design and theory development is elaborated as a mode of mutual engagement occurring in an interdisciplinary trading zone, where neither discipline is placed at the service of the other and nor do disciplinary boundaries dissolve. To this end, we draw on analyses of mutual engagements between computer and social scientists stemming from the fields of (...) computer-supported cooperative work, human−computer interaction, and science and technology studies. We especially build on theoretical work in STS concerning information technology in health care and extend recent contributions from STS with respect to the modes of engagement and trading zones between computer and social sciences. We conceive participative digital systems design as a form of inquiry for the analysis of cooperative work settings, particularly when social science becomes part of design processes. We illustrate our conceptual approach using data from an interdisciplinary project involving computer graphics designers, sociologists, and neurosurgeons with the aim of developing patient-centered visualizations for clinical cooperation on a hospital ward. (shrink)

During the past decade, the “script” concept, indicating how technologies prescribe human actions, has acquired a central place in STS. Until now, the concept has mainly functioned in descriptive settings. This article will deploy it in a normative setting. When technologies coshape human actions, they give material answers to the ethical question of how to act. This implies that engineers are doing “ethics by other means”: they materialize morality. The article will explore the implications of this insight for engineering ethics. (...) It first augments the script concept by developing the notion of technological mediation. After this, it investigates how the concept of mediation could be made fruitful for design ethics. It discusses how the ambition to design behaviorinfluencing technologies raises moral questions itself and elaborates two methods for anticipating technological mediation in the design process: performing mediation analyses and using an augmented version of constructive technology assessment. (shrink)

When should a surveillance system that is used in preventive policing sacrifice the privacy of citizens to prevent criminality? What should be the impact of individual moral expectations when a social media platform designs an algorithm? To what degree can we use technology-driven deception in dementia care practices? And can we create a moral compass for a dashboard society? Over the last decade, the impact of technological innovation has been unprecedented. It has profoundly changed the way we participate and (...) interact in society. It has also led to new moral challenges. Not only because of the technology itself, but also because this technology is used in the context of a globalised world with a more prominent role for the private sector. This can result in moral confusion: individuals who alternately assume the role of citizen and consumer feel unable to influence the design of technology that has a strong impact on their core values. Sustaining this moral confusion is in nobody's long-term interest. In this book, we propose to overcome this moral confusion by using a bottom-up design approach that incubates ethics when constructing new technologies. This book is composed of four parts. In the first part we focus on how to integrate moral decisions and morality in the design process of new technology. In the second part we assess how moral design relates to related discourse, including business ethics, law and policy. In the third part of this book various case studies are highlighted that focus on particular moral design issues at the crossroads of technological innovation in the public and private sector. In the last part we look ahead and discuss what the future might look like if we use moral design as a central approach in creating new technology. This book is relevant for IT and engineering professionals, business leaders and policymakers with innovation in their portfolios, and students of (applied) science who are interested in the moral design of technology. The chapters are written by experts and leading researchers in an attractive, accessible and practical writing style. Each chapter offers colourful examples and challenges the reader to critically think through moral decision-making and the design of innovation"--Page 4 of cover. (shrink)

This article proposes the use of technological frames (TF) as an analytical tool to support the investigations within value sensitive design. TF can help to identify values that are consistent or conflicting within and between stakeholders, which is exemplified with a case of patient accessible electronic health records in Sweden. The article concludes that TF can help to identify values, which may then help to understand and address possible concerns in the design process.

Manufacturing and industry practices are undergoing an unprecedented revolution as a consequence of the convergence of emerging technologies such as artificial intelligence, robotics, cloud computing, virtual and augmented reality, among others. This fourth industrial revolution is similarly changing the practices and capabilities of operators in their industrial environments. This paper introduces and explores the notion of the Operator 4.0 as well as how this novel way of conceptualizing the human operator necessarily implicates human values in the technologies that constitute it. (...) The design approach known as value sensitive design (VSD) is used to explore how these Operator 4.0 technologies can be designed for human values. Expert elicitation surveys were used to determine the values of industry stakeholders and examples of how the VSD methodology can be adopted by engineers in order to design for these values is illustrated. The results provide preliminary adoption strategies that industrial teams can take to Operator 4.0 technology for human values. (shrink)

Coordination is a key problem for addressing goal–action gaps in many human endeavors. We define interpersonal coordination as a type of communicative action characterized by low interpersonal belief and goal conflict. Such situations are particularly well described as having collectively “intelligent”, “common good” solutions, viz., ones that almost everyone would agree constitute social improvements. Coordination is useful across the spectrum of interpersonal communication—from isolated individuals to organizational teams. Much attention has been paid to coordination in teams and organizations. In this (...) paper we focus on the looser interpersonal structures we call active support networks, and on technology that meets their needs. We describe two needfinding investigations focused on social support, which examined four application areas for improving coordination in ASNs: academic coaching, vocational training, early learning intervention, and volunteer coordination; and existing technology relevant to ASNs. We find a thus-far unmet need for personal task management software that allows smooth integration with an individual’s active support network. Based on identified needs, we then describe an open architecture for coordination that has been developed into working software. The design includes a set of capabilities we call “social prompting”, as well as templates for accomplishing multi-task goals, and an engine that controls coordination in the network. The resulting tool is currently available and in continuing development. We explain its use in ASNs with an example. Follow-up studies are underway in which the technology is being applied in existing support networks. (shrink)

A long tradition of discourse and practice claims that technology designers need to take note of the characteristics and aspirations of potential users in design. Practitioners in the field of user-centered design have developed methods to facilitate this process. These methods represent interesting vehicles for the pursuit of normative politics of technology. In this article, the authors use a case study of the introduction and use of UCD methods in Australia to explore the politics of getting (...) the methods to work in practice. Drawing on the work of Bruno Latour and Marc Berg, the authors argue that UCD methods are tools for engendering new forms of socio-technical relations. However, their normative potential does not arise out of their ability to manipulate abstract categories such as user, technology, and workplace. Instead, it arises out of the complex and unpredictable socio-technical mixes that are generated when people attempt to put them into practice. (shrink)

This article presents the framework Capability Sensitive Design (CSD), which consists of merging the design methodology Value Sensitive Design (VSD) with Martha Nussbaum's capability theory. CSD aims to normatively assess technology design in general, and technology design for health and wellbeing in particular. Unique to CSD is its ability to account for human diversity and to counter (structural) injustices that manifest in technology design. The basic framework of CSD is demonstrated by (...) applying it to the hypothetical design case of a therapy chatbot for mental health. By applying CSD to a design case, the merits of this new framework over the standard VSD approach become apparent. Also, the application demonstrates what a technology design would look like when attention is paid to capabilities right from the start of the design process. (shrink)