Healthcare reforms in India have been a much-debated issue in the recent past. While the debate has focused mainly on the right to healthcare, another by-product that has evolved out of the debate was the current problem of medical malpractice and the healthcare law. The last decade has seen an increase in the healthcare facilities in the country. This, however, has come with a bulk of medical error cases which the courts have entertained. According to reports, there has been an (...) increase in medical litigation cases by 400% in the last decade. There are about 5.2 million cases of medical error in the country every year. While there exists a standard legal system in the country which entertains such complaints of medical malpractice, the attempt by regulators and medical practitioners should be to reduce these cases. This paper seeks to analyze the extent to which medical malpractice cases affect consumers. It analyzes the existing medical liability system which has mainly evolved through the jurisprudence laid down by the English courts and critiques it. It also looks into the major reasons for such medical mishaps. Authors argue that a “No-Fault” system may give better outcomes. They analyze this by looking at the no-fault liability model implemented in New Zealand. Narratives of no-fault liability being implemented in India have also been used. These are showcased from instances of Motor Vehicles Act, 1988, and Clinical Trial regulations. It is also argued that a by-product of a no-fault liability system is stringent regulations which are used to reduce the possibility of medical mishaps altogether. Lastly, the possible problems of the no-fault liability system are discussed in the paper. (shrink)

Operational and financial sustainability have, over time, remained as issues in the microfinance industry. The microfinance industry is struggling to gain self-sufficiency in Pakistan due to non-performing loans and operating costs. Simultaneously, deliberation on corporate social responsibility is also considered in academic literature and organizational practices. However, studies on CSR and financial performance in the microfinance sector are scarce, especially in Pakistan. CSR will develop customer attraction and loyalty, employee attraction, motivation and commitment, MFIs' reputation and access to capital, and (...) eventually build financial performance. Interviews were conducted with branch managers of microfinance institutions to test previous questionnaires. A self-administered survey was conducted to collect data from the managers of the microfinance banks operating in Punjab. Descriptive and inferential statistics were performed to answer research questions using Smart PLS. Most of the microfinance institutions believe in social responsibilities but lacks fund allocation and approval from higher management, and results are in line with prior studies. These empirical findings lead to the perception that CSR is not a barrier performance in microfinance banks as they have access to capital. The results indicated a strong positive correlation between CSR and the financial performance of the MFIs. CSR also positively correlates with customer retention, employees' motivation and attraction, and business reputation. CSR was associated with access to capital but was found to be weak. The research also narrated the limitation and practical implications of the study. The study also discusses further research directions. (shrink)

This book discusses a variety of world views that we can find to describe human relationships with the environment, and the underlying values in them. It reviews existing international legal instruments discussing some of the ethical values that have been agreed among member states of the United Nations.

We created paired moral dilemmas with minimal contrasts in wording, a research strategy that has been advocated as a way to empirically establish principles operative in a domain‐specific moral psychology. However, the candidate “principles” we tested were not derived from work in moral philosophy, but rather from work in the areas of consumer choice and risk perception. Participants were paradoxically less likely to choose an action that sacrifices one life to save others when they were asked to provide more reasons (...) for doing so (Experiment 1), and their willingness to sacrifice lives depended not only on how many lives would be saved, but on the number of lives at risk (Experiment 2). The latter effect was also found in a within‐subjects design (Experiment 3). These findings suggest caution in the use of artificial dilemmas as a key testbed for revealing principled bases for moral judgment. (shrink)

Mammalian telomeres have evolved safeguards to prevent their recognition as DNA double‐stranded breaks by suppressing the activation of various DNA sensing and repair proteins. We have shown that the telomere‐binding proteins TRF2 and RAP1 cooperate to prevent telomeres from undergoing aberrant homology‐directed recombination by mediating t‐loop protection. Our recent findings also suggest that mammalian telomere‐binding proteins interact with the nuclear envelope to maintain chromosome stability. RAP1 interacts with nuclear lamins through KU70/KU80, and disruption of RAP1 and TRF2 function result in (...) nuclear envelope rupture, promoting telomere‐telomere recombination to form structures termed ultrabright telomeres. In this review, we discuss the importance of the interactions between shelterin components and the nuclear envelope to maintain telomere homeostasis and genome stability. (shrink)

The Fourth Edition of this bestselling, highly regarded book has been fully revised to incorporate changes in law and clinical guidance making a vital impact on patient management, encompassing: The Equalities Act 2010 which provides a right of older people to treatment without discrimination ; Case law on withdrawing nutrition and hydration ; Updated guidance on resuscitation from the Resuscitation Council, the British Medical Association and the Royal College of Nursing ; The redefining of good medical practice by the General (...) Medical Council ; The abolition of the Liverpool Care Pathway with an updated guidance on end of life care and advance care planning. Expanded throughout, this new edition also integrates two entirely new chapters covering testamentary capacity and role of the physician, and religious beliefs and end of life issues. Its practical, reflective and informative approach continue to make it essential reading for all health professionals, particularly trainees, involved in making difficult decisions in the care of older persons. It is also highly recommended for undergraduate medical students. (shrink)

Majority of Chinese characters are pictographic characters with strong associative ability and when a character appears for Chinese readers, they usually associate with the objects, or actions related to the character immediately. Having this background, we propose a system to visualize the simplified Chinese characters, so that developing any skills of either reading or writing Chinese characters is not necessary. Considering the extensive use and application of mobile devices, automatic identification of Chinese characters and display of associative images are made (...) possible in smart devices to facilitate quick overview of a Chinese text. This work is of practical significance considering the research and development of real-time Chinese text recognition, display of associative images and for such users who would like to visualize the text with only images. The proposed Chinese character recognition system and visualization tool is named as MyOcrTool and developed for Android platform. The application recognizes the Chinese characters through OCR engine, and uses the internal voice playback interface to realize the audio functions and display the visual images of Chinese characters in real-time. (shrink)

Most psychological research consists of experiments that put people in artificial situations that elicit unnatural behavior whose ecological validity is unknown. Without knowing the psychocultural meaning of experimental situations, we cannot interpret the responses of WEIRD people, let alone people in other cultures. Psychology, like other sciences, needs to be solidly rooted in naturalistic observation and description of people around the world. Theory should be inductively developed and tested against real-world behavior.

Moral hypocrisy is typically viewed as an ethical accusation: Someone is applying different moral standards to essentially identical cases, dishonestly claiming that one action is acceptable while otherwise equivalent actions are not. We suggest that in some instances the apparent logical inconsistency stems from different evaluations of a weak argument, rather than dishonesty per se. Extending Corner, Hahn, and Oaksford's (2006) analysis of slippery slope arguments, we develop a Bayesian framework in which accusations of hypocrisy depend on inferences of shared (...) category membership between proposed actions and previous standards, based on prior probabilities that inform the strength of competing hypotheses. Across three experiments, we demonstrate that inferences of hypocrisy increase as perceptions of the likelihood of shared category membership between precedent cases and current cases increase, that these inferences follow established principles of category induction, and that the presence of self-serving motives increases inferences of hypocrisy independent of changes in the actions themselves. Taken together, these results demonstrate that Bayesian analyses of weak arguments may have implications for assessing moral reasoning. (shrink)

The report describes an application of ontologies to the analysis of wind turbine manufacturing data. We show how applying ontologies to composite materials data may facilitate the discovery of optimum composite material designs that will deliver maximum wind turbine blade performance within environmental constraints.

The manufacturing industry is evolving rapidly, becoming more complex, more interconnected, and more geographically distributed. Competitive pressure and diversity of consumer demand are driving manufacturing companies to rely more and more on improved knowledge management practices. As a result, multiple software systems are being created to support the integration of data across the product life cycle. Unfortunately, these systems manifest a low degree of interoperability, and this creates problems, for instance when different enterprises or different branches of an enterprise interact. (...) Common ontologies (consensus-based controlled vocabularies) have proved themselves in various domains as a valuable tool for solving such problems. In this paper, we present a consensus-based Additive Manufacturing Ontology (AMO) and illustrate its application in promoting re-usability in the field of dentistry product manufacturing. (shrink)

The development of manufacturing technologies for new materials involves the generation of a large and continually evolving volume of information. The analysis, integration and management of such large volumes of data, typically stored in multiple independently developed databases, creates significant challenges for practitioners. There is a critical need especially for open-sharing of data pertaining to engineering design which together with effective decision support tools can enable innovation. We believe that ontology applied to engineering (OE) represents a viable strategy for the (...) alignment, reconciliation and integration of diverse and disparate data. The scope of OE includes: consistent capture of knowledge pertaining to the types of entities involved; facilitation of cooperation among diverse group of experts; more effective ongoing curation, and update of manufacturing data; collaborative design and knowledge reuse. As an illustrative case study we propose an ontology focused on the representation of composite materials focusing in particular on the class of Functionally Graded Materials (FGM) in particular. The scope of the ontology is to provide information about the components of such materials, the manufacturing processes involved in creation, and diversity of application ranging from additive manufacturing to restorative dentistry. The ontology is developed using Basic Formal Ontology (BFO) and the Ontology for Biomedical Investigations (OBI). (shrink)

It is an old philosophical idea that if the future self is literally different from the current self, one should be less concerned with the death of the future self. This paper examines the relation between attitudes about death and the self among Hindus, Westerners, and three Buddhist populations. Compared with other groups, monastic Tibetans gave particularly strong denials of the continuity of self, across several measures. We predicted that the denial of self would be associated with a lower fear (...) of death and greater generosity toward others. To our surprise, we found the opposite. Monastic Tibetan Buddhists showed significantly greater fear of death than any other group. The monastics were also less generous than any other group about the prospect of giving up a slightly longer life in order to extend the life of another. (shrink)

In recent years there has been a number of promising technical and institutional developments regarding use of ontologies in industry. At the same time, however, most industrial ontology development work remains within the realm of academic research and is without significant uptake in commercial applications. In biomedicine, by contrast, ontologies have made significant inroads as valuable tools for achieving interoperability between data systems whose contents derive from widely heterogeneous sources. In this position paper, we present a set of principles learned (...) from the successful Open Biomedical Ontologies (OBO) Foundry initiative to guide the design and development of the Industrial Ontologies Foundry (IOF), which is a counterpart to the OBO Foundry initiative for the manufacturing industry. We also illustrate the potential utility of these principles by sketching the conceptual design of a framework for sustainable IOF development. (shrink)

Many states prohibit patients from appointing their physicians as health care proxies, fearing paternalism and conflict of interest. But the potential for conflict is not unique to physicians, and patients may have compelling reasons to prefer that their doctor make decisions on their behalf. Managing potential conflicts serves patients better than denying them the right to choose who will make health care decisions for them when they are no longer competent.

: By examining evidence from India, where quotas for women in local government were introduced in 1993, this article argues that institutional reform can disturb hegemonic discourses sufficiently to open a window of opportunity where deliberative democratic norms take root and where, in addition to the politics of recognition, the politics of redistribution also operates.

With the human genome mapped, and with the mapping of more than one hundred animal genomes in progress, the amount of genetic data available is increasing exponentially. This exponential increase in data is having an immediate impact on the process of drug development. By using techniques of information technology to manipulate data regarding the genes, proteins, and biochemical pathways associated with various diseases, scientists are beginning to be able to design drugs in a systematic fashion. In the context of any (...) given disease, scientists look to see whether a gene, a protein for which the gene codes, or another protein in the relevant biochemical pathway could be the “target” biological molecule, the “knocking out” of which would halt or slow the disease's progression. Once a target molecule has been identified and characterized structurally, drug therapies that would be likely to knock out this target can be identified and tested systematically. The merger of information technology and genetic technology has changed the process of pharmaceutical development so much that a new term—bioinformatics—has been coined to describe this new approach to such development. (shrink)